Odys Loox - Android 2.3.1 cRoms

P

PopEi

Stammgast
251
Aktualisiert am: 16.06.2012

Benutzung auf eigene Gefahr!
Weder das Android-Hilfe Forum noch ich oder irgendeiner übernimmt die Haftung an Schäden die durch die Nutzung der hier im Thread aufgeführten Dateien, Anleitungen und Links jeglicher Art entstehen könnten!


Bislang sind keinerlei Schäden bekannt!



56764119.png




cRom Patches
33078191.png
English ext3 mod~.img (boot.-system.img) patch-update instructions
If you are on Windows then use the RKAndroidTool.exe with admin rights!

1. Unzip the ext3 mod~.img (boot.-system.img) update in a directory of your choice on your computer.

2. Open this directory and then use from this folder -
RKAndroid_1.29 (i.e RKAndroidTool.exe) with admin rights!


3. Turn off the Loox tablet if necessary.

4. Connect the Loox tablet to the power supply.

5. Press the Menu key (M) on the Loox and keep it pressed.

6. Connect the Loox (while holding down the menu button) via a USB cable to the PC.

Caution!

Be sure to use the "USB PC" port.

7. If the Loox tablet is not detected by the PC, hold down the Loox Menu key (M) and press the Loox reset button at the same time. (Use a short pointed object such as a paper clip.)

8. Now go back to the update tool (RKAndroid 1.29).

"Found RKAndroid USB Loader Rock" should be displayed at the buttom.

Note!

If "No. Found RKAndroid Rock USB" is still displayed, please hold down the Menu key (M) pressed and press with the help of a pointed object (such as a paper clip) the Reset button on the Loox.

Then click "Run" to start the update.

9. Wait until the notification area on the right side
displayes "INFO: Run OK".

10. The update was completed successfully and the device restarts.

11. Wait until the machine has rebooted and note the status messages on the device:

12. Disconnect the USB connection.
Loox ext3 boot.img Patch-Update mit Joystick, USB Hub, USB/Bluetooth-GPS Empfänger, Bluetooth-Dongles Aktivierung
Kein update.img für die SD-Card, Beschreibung zum flashen im Archiv.

(RKAndroidTool v.1.29 only for Windows)

Patch für die fluxflux Versionen 1.0 vom 13.-15.01.2012

Größe-Gepackt:ca:2,17MB
Share-Online Download---Mit Flashanleitung
Alternativer Download---Mit Flashanleitung

By fluxflux

Für das schreibbare EXT3-System vom 13. oder 15.01.2012 fürs Odys-Loox von fluxflux, wer schon das ext3 System vom 12.02.2012 hat, braucht diesen Patch nicht.

Dieses boot.img wird mit dem Flashtool von Odys geflasht.

a) Wer schon das ext3-System auf dem Loox hat, der muss nur die
boot.img neu flashen,
dabei kein "Erase IDB" durchführen! Die Daten bleiben erhalten,
/data und /cache werden nicht neu formatiert.

Ausserdem muss einmalig ein neues Verzeichnis /system/etc/rc.d/ angelegt
werden, in das die beiden hier verfügbaren Skripte rc.inotifyd und
rc.devwatch kopiert und ausführbar gemacht werden.

Dazu eine Root-Konsole öffnen und folgendes eingeben (ich gehe davon aus,
dass die beiden Skripte (rc.inotifyd und rc.devwatch) auf der externen SD-Karte gespeichert sind):

mkdir /system/etc/rc.d/
busybox cp /sdcard/rc.inotifyd /system/etc/rc.d/
busybox cp /sdcard/rc.devwatch /system/etc/rc.d/
busybox cp /busybox /system/bin/
chmod 777 /system/bin/busybox
chmod 777 /system/etc/rc.d/rc.*

Rebooten, damit das Skript rc.inotifyd gestartet wird, das passiert dann ab
sofort automatisch.

b) In der boot.img sind Kernelmodule für den USB-Hub, einen Joystick, Bluetooth-
Dongles und USB-GPS-Empfänger enthalten.

c) Bluetooth-Dongles werden beim Anstecken erkannt, eingeschaltet und sind einsatz-
bereit.

Der Dienst inotifyd (gestartet aus der boot.img) liegt als Skript in
/system/etc/rc.d/ und startet das Skript /system/etc/rc.d/rc.devwatch, das
folgende Geräte beim Einstecken via USB erkennt und aktiviert:

BT-Dongles für externe BT-GPS-Empfänger (dazu muss noch UsbGPS installiert und
innerhalb von 30 Sekunden nach Anstecken des BT-Dongles mit der Schnittstelle
/dev/rfcomm0 aktiviert werden, damit externe BT-GPS-Empfänger sauber ins
System eingebunden werden).

d) USB-GPS-Geräte (pl2303 und cp210x basiert, also seriell) werden gestartet, auch
hier muss zum Nutzen des Datenstroms UsbGPS installiert und mit der Schnittstelle
/dev/ttyUSB0 aktiviert werden.

e) Joysticks (hier muss Gamepad IME installiert und gestartet werden, der Joystick
wird durch das Skript schon mit den notwendigen Rechten versehen).

f) Das System stellt 1 GB für Apps zur Verfügung, 2 GB bleiben auf dem NAND noch
für Nutzerdaten frei.

Rückfragen via Forum oder per Mail an Thomas pilleus.pulcher@googlemail.com

Viel Spaß,

Thomas.
Loox ext3 mod~.img Patch-Update mit Joystick, USB Hub, USB-GPS-Empfänger und Bluetooth-Dongles Aktivierung
Kein update.img für die SD-Card, Beschreibung zum flashen im Archiv.

(RKAndroidTool v.1.29 only for Windows)

Patch für die fluxflux Versionen 1.0 vom 13.-15.01.2012

Größe-Gepackt:ca:119,17MB
Share-Online Download---Mit Flashanleitung

By fluxflux

Hinweis!
Für das ext3 System vom 13. oder 15.01.2012 fürs Odys-Loox von fluxflux, wer schon das ext3 System vom 12.02.2012 hat, braucht diesen Patch nicht.
Wer das ext3-System schon hat, bei dem bleiben die Daten beim flashen des mod~.img´s (boot. und system.img) erhalten, kein "Erase IDB",
/data und /cache werden nicht neu formatiert.

In der boot.img sind Kernelmodule für den USB-Hub, einen Joystick, Bluetooth-
Dongles und USB-GPS-Empfänger enthalten.

Bluetooth-Dongles werden beim Anstecken erkannt, eingeschaltet und sind einsatz-
bereit.

Der Dienst inotifyd (gestartet aus der boot.img) liegt als Skript in
/system/etc/rc.d/ und startet das Skript /system/etc/rc.d/rc.devwatch, das
folgende Geräte beim Einstecken via USB erkennt und aktiviert:

BT-Dongles für externe BT-GPS-Empfänger (dazu muss noch UsbGPS installiert und
innerhalb von 30 Sekunden nach Anstecken des BT-Dongles mit der Schnittstelle
/dev/rfcomm0 aktiviert werden, damit externe BT-GPS-Empfänger sauber ins
System eingebunden werden).

USB-GPS-Geräte (pl2303 und cp210x basiert, also seriell) werden gestartet, auch
hier muss zum Nutzen des Datenstroms UsbGPS installiert und mit der Schnittstelle
/dev/ttyUSB0 aktiviert werden.

Joysticks (hier muss Gamepad IME installiert und gestartet werden, der Joystick
wird durch das Skript schon mit den notwendigen Rechten versehen).

Das System stellt 1 GB für Apps zur Verfügung, 2 GB bleiben auf dem NAND noch
für Nutzerdaten frei.

Rückfragen via Forum oder per Mail an Thomas pilleus.pulcher@googlemail.com

Viel Spaß,

Thomas.



231m.png
29233782.png


English ext4 update instructions
Note:

Caution!

Please note that when flashing a new update,
all the files and all installed
applications and programs on the internal memory will get lost!

Please save these on your computer before continuing.


At the time of writing this, the ext4 update can only be flashed
via USB with a flashtool - it seems it is not possible to create an update.img for flashing from an external SD card.



If you are on Linux you can use rkflashtool: [TOOL] rkflashtool for Linux and rk2808, rk2818 and rk2918 based tablets - xda-developers


Please read the instructions carefully!

Further scripts are available here:
Rksp - Arctablet



If you are on Windows then use the RKAndroidTool.exe with admin rights!

1. Unzip the ext4 update in a directory of your choice on your computer.

2. Open this directory and then use from this folder -
RKAndroid_1.29 (i.e RKAndroidTool.exe) with admin rights!


3. Turn off the Loox tablet if necessary.

4. Connect the Loox tablet to the power supply.

5. Press the Menu key (M) on the Loox and keep it pressed.

6. Connect the Loox (while holding down the menu button) via a USB cable to the PC.

Caution!

Be sure to use the "USB PC" port.

7. If the Loox tablet is not detected by the PC, hold down the Loox Menu key (M) and press the Loox reset button at the same time. (Use a short pointed object such as a paper clip.)

8. If you flash for the first time, you have to install the drivers at first.

9. Select "No, not this time", and then select "Install from a list or specific location", then open the folder update ext3 and then folder
USBdriver and select x86 for 32bit systems or amd64 for 64bit systems and press OK.


10. Sometimes the driver file must be selected manually.

Select "Include this location in Search"
Browse in the same folder as already described. The driver file must be manually selected.


11. Click "Next" and then "OK".

12. Click "Finish" to complete the driver installation.

The message "The software for the following hardware was installed" confirms the installation was successful.

13. Now go back to the update tool (RKAndroid 1.29).

"Found RKAndroid USB Loader Rock" should be displayed at the buttom.

Note!

If "No. Found RKAndroid Rock USB" is still displayed, please hold down the Menu key (M) pressed and press with the help of a pointed object (such as a paper clip) the Reset button on the Loox.

14. Important!

Click on "Erase IDB" and wait until the procedure terminates.

Then click "Run" to start the update.


15. Wait until the notification area on the right side
displayes "INFO: Run OK".

16. The update was completed successfully and the device restarts.

17. Wait until the machine has rebooted and note the status messages on the device:

Recovery System v1.3........
Formatting DATA :......
Formatting CACHE :......
Formatting UDISK :......
Formatting PAGE CACHE :.....
Reboot system :.....
.. 3.
.. 2.
.. 1.


18. Disconnect the USB connection.
Custom Odys Loox ext4 Beta Update
Kein update.img für die SD-Card, Beschreibung zum flashen im Archiv.

(RKAndroidTool v.1.29 only for Windows)

Version Androwin 1.0 Beta (04.04.2012)

Größe-Gepackt:ca:124,02MB
Share-Online Download---mit Flashanleitung
ZippyShare Download---mit Flashanleitung

By satwilli

ext4 Androwin v.1.0 Beta

Mein Frauchen war das Andoid zu langweilig, desswegen hab ich mal etwas an der Optik gefeilt.
Alle Origional Apps sind enthalten und aktualisiert, plus Google Play und ein paar zusätzliche, wie z.B. eine App mit Windowsoberfläche.

-System Data/Cach ext4
-USB-GPS
-Bluetooth

Der Launcher ist eine Freeversion und muss beim ersten Start gedreht werden.
Auf Bildschirm drücken, Settings/Rotate Sreen.

Bei fehlerhaften flash und vor dem flashen eines neuen Systems (ext3) zu (ext4) oder (cramFS) und umgekehrt, ein Erase IDB mit dem RKAndroidTool v.1.29 machen.

shot_000001.pngshot_000002.png
shot_0000301.pngshot_e000002.png
Custom Odys Loox ext4 Beta Update
Kein update.img für die SD-Card, Beschreibung zum flashen im Archiv.

(RKAndroidTool v.1.29 only for Windows)

Version satflux 1.0 Beta (19.02.2012)

Größe-Gepackt:ca:118,21MB
Share-Online Download---mit Flashanleitung
Alternativer Download---mit Flashanleitung

By satwilli
Mit freundlicher Unterstützung by fluxflux

Mal wieder was zum testen, diesmal ext4 Odys Loox.

Als Basis diente die ext3 Version 1.0 (12.02.2012) unverändert by fluxflux.
SD Karte wird beim ersten Start eventuell nicht erkannt, nach Neustart geht es.
Ein paar Dinge sind noch eingebaut, aber noch nicht aktiv, kommt eventuell später, wenn der Test erfolgreich ist.

Wie immer, Test auf eigene Gefahr.

Bei fehlerhaften flash und vor dem flashen eines neuen Systems (ext3) zu (ext4) oder (cramFS) und umgekehrt, ein Erase IDB mit dem RKAndroidTool v.1.29 machen.
Custom Odys Loox ext4 Beta Update
Kein update.img für die SD-Card, Beschreibung zum flashen im Archiv.

(RKAndroidTool v.1.29 only for Windows)

Version 1.0 Beta (17.02.2012) Siehe hier

Alternativer Download---mit Flashanleitung

By fluxflux

ext4 v.1.0 Beta

Auto-Rotation geht noch nicht und muß aus gestellt werden, unter: Einstellungen>Position>Display>Rotation

Die boot.img ist auf inotifyd umgestellt, die parameter sind aus dem ext3-System für 1 GB /data übernommen und die Partitionsparameter fürs system sind etwas verkleinert, um keinen Platz zu verschenken, die Kalibrierung und TitaniumBackup sind gleich ins system.img integriert.

Bei fehlerhaften flash und vor dem flashen eines neuen Systems (ext3) zu (ext4) oder (cramFS) und umgekehrt, ein Erase IDB mit dem RKAndroidTool v.1.29 machen.
Custom Odys Loox ext4 Beta Update
Kein update.img für die SD-Card, Beschreibung zum flashen im Archiv.

(RKAndroidTool v.1.29 only for Windows)

Version 1.0 Beta (13.02.2012)

Größe-Gepackt:ca:126,30MB
Alternativer Download---mit Flashanleitung

By wusel

ext4 v.1.0 Beta

Auto-Rotation geht noch nicht und muß aus gestellt werden, unter: Einstellungen>Position>Display>Rotation

Bei fehlerhaften flash und vor dem flashen eines neuen Systems (ext3) zu (ext4) oder (cramFS) und umgekehrt, ein Erase IDB mit dem RKAndroidTool v.1.29 machen.
33078191.png
English ext3 update instructions
Note:

Caution!

Please note that when flashing a new update,
all the files and all installed
applications and programs on the internal memory will get lost!

Please save these on your computer before continuing.


At the time of writing this, the ext3 update can only be flashed
via USB with a flashtool - it seems it is not possible to create an update.img for flashing from an external SD card.



If you are on Linux you can use rkflashtool: [TOOL] rkflashtool for Linux and rk2808, rk2818 and rk2918 based tablets - xda-developers


Please read the instructions carefully!

Further scripts are available here:
Rksp - Arctablet



If you are on Windows then use the RKAndroidTool.exe with admin rights!

1. Unzip the ext3 update in a directory of your choice on your computer.

2. Open this directory and then use from this folder -
RKAndroid_1.29 (i.e RKAndroidTool.exe) with admin rights!


3. Turn off the Loox tablet if necessary.

4. Connect the Loox tablet to the power supply.

5. Press the Menu key (M) on the Loox and keep it pressed.

6. Connect the Loox (while holding down the menu button) via a USB cable to the PC.

Caution!

Be sure to use the "USB PC" port.

7. If the Loox tablet is not detected by the PC, hold down the Loox Menu key (M) and press the Loox reset button at the same time. (Use a short pointed object such as a paper clip.)

8. If you flash for the first time, you have to install the drivers at first.

9. Select "No, not this time", and then select "Install from a list or specific location", then open the folder update ext3 and then folder
USBdriver and select x86 for 32bit systems or amd64 for 64bit systems and press OK.


10. Sometimes the driver file must be selected manually.

Select "Include this location in Search"
Browse in the same folder as already described. The driver file must be manually selected.


11. Click "Next" and then "OK".

12. Click "Finish" to complete the driver installation.

The message "The software for the following hardware was installed" confirms the installation was successful.

13. Now go back to the update tool (RKAndroid 1.29).

"Found RKAndroid USB Loader Rock" should be displayed at the buttom.

Note!

If "No. Found RKAndroid Rock USB" is still displayed, please hold down the Menu key (M) pressed and press with the help of a pointed object (such as a paper clip) the Reset button on the Loox.

14. Important!

Click on "Erase IDB" and wait until the procedure terminates.

Then click "Run" to start the update.


15. Wait until the notification area on the right side
displayes "INFO: Run OK".

16. The update was completed successfully and the device restarts.

17. Wait until the machine has rebooted and note the status messages on the device:

Recovery System v1.3........
Formatting DATA :......
Formatting CACHE :......
Formatting UDISK :......
Formatting PAGE CACHE :.....
Reboot system :.....
.. 3.
.. 2.
.. 1.


18. Disconnect the USB connection.
Custom Odys Loox ext3 Update mit USB-Hub, Joystick, Bluetooth-
Dongles und USB-GPS Aktivierung

Kein update.img für die SD-Card, Beschreibung zum flashen im Archiv.

(RKAndroidTool v.1.29 only for Windows)

Mein Favorit!!!
Version 1.0 (12.02.2012)

..............................................................................................
fluxflux
---> Danke-Button <---
..............................................................................................


Größe-Gepackt:ca:125,34MB
Alternativer Download---mit Flashanleitung

By fluxflux

Hinweis!
Wer schon das ext3-System vom 13. oder 15.01.2012 von fluxflux auf dem Loox hat, der muss nur die mod~.img´s
(boot. und system.img) neu flashen, kein "Erase IDB" durchführen! Die Daten bleiben erhalten,
/data und /cache werden nicht neu formatiert.
Zu finden unter cRom patches!!!!!

==================================================

Schreibbares EXT3-System fürs Odys-Loox

Wer das ext3-System zum ersten Mal flasht, der muss mit einem kompletten
Datenverlust rechnen, denn /data und /cache werden neu formatiert!

Dieses System wird mit dem Flashtool von Odys geflasht.

Das System ist ext3 und schreibbar, / ist auch rw. /data und /cache auch ext3
und rw.

In der boot.img sind Kernelmodule für den USB-Hub, einen Joystick, Bluetooth-
Dongles und USB-GPS-Empfänger enthalten.

Bluetooth-Dongles werden beim Anstecken erkannt, eingeschaltet und sind einsatz-
bereit.

Der Dienst inotifyd (gestartet aus der boot.img) liegt als Skript in
/system/etc/rc.d/ und startet das Skript /system/etc/rc.d/rc.devwatch, das
folgende Geräte beim Einstecken via USB erkennt und aktiviert:

BT-Dongles für externe BT-GPS-Empfänger (dazu muss noch UsbGPS installiert und
innerhalb von 30 Sekunden nach Anstecken des BT-Dongles mit der Schnittstelle
/dev/rfcomm0 aktiviert werden, damit externe BT-GPS-Empfänger sauber ins
System eingebunden werden).

USB-GPS-Geräte (pl2303 und cp210x basiert, also seriell) werden gestartet, auch
hier muss zum Nutzen des Datenstroms UsbGPS installiert und mit der Schnittstelle
/dev/ttyUSB0 aktiviert werden.

Joysticks (hier muss Gamepad IME installiert und gestartet werden, der Joystick
wird durch das Skript schon mit den notwendigen Rechten versehen).

Das System stellt 1 GB für Apps zur Verfügung, 2 GB bleiben auf dem NAND noch
für Nutzerdaten frei.

Rückfragen via Forum oder per Mail an Thomas pilleus.pulcher@googlemail.com

Viel Spaß,

Thomas.


Bei fehlerhaften flash und vor dem flashen eines neuen Systems (ext3) zu (ext4) oder (cramFS) und umgekehrt, ein Erase IDB mit dem RKAndroidTool v.1.29 machen.
Änderungen auf dem Loox (apps, einträge etc...) werden erst nach einem Reboot wirksam.

Diese ext3 flash-Updates sind von dem android-hilfe.de Mitglied fluxflux, ich habe sie nur zum Download bereitgestellt und eine Flashanleitung erstellt.

Also Leute bedankt euch bei fluxflux in seinem Thread dafür, in dem ihr dort auf den [URL="https://www.android-hilfe.de/post_thanks.php?do=post_thanks_add&p=2475192&securitytoken=1339844610-16390bd76b91cd9ac7d4f633ea60bbab56cb0e3b"]Danke-Knopf[/URL] drückt, es war eine menge Arbeit für ihn diese zu erstellen.
Ältere Versionen:
Custom Odys Loox ext3 Update mit Standard Apps
Kein update.img für die SD-Card, Beschreibung zum flashen im Archiv.

(RKAndroidTool v.1.29 only for Windows)

Version 1.0 (15.01.2012)

Größe-Gepackt:ca:121,32MB
Share-Online Download---mit Flashanleitung
Alternativer Download---mit Flashanleitung

By fluxflux

hosts angepasst
build.prop angepasst
gapps angepasst (Market sichtbar)
apps unverändert
Superuser und su aktualisiert
ext3,rw
Daten Partition von 512 MB auf 1024 MB vergrößert

Bei fehlerhaften flash und vor dem flashen eines neuen Systems (ext3) zu (ext4) oder (cramFS) und umgekehrt, ein Erase IDB mit dem RKAndroidTool v.1.29 machen.
Änderungen auf dem Loox (apps, einträge etc...) werden erst nach einem Reboot wirksam.

Diese ext3 flash-Updates sind von dem android-hilfe.de Mitglied fluxflux, ich habe sie nur zum Download bereitgestellt und eine Flashanleitung erstellt.

Also Leute bedankt euch bei fluxflux in seinem Thread dafür, in dem ihr dort auf den Danke-Knopf drückt, es war eine menge Arbeit für ihn diese zu erstellen.
Custom Odys Loox ext3 Update mit Custom Apps
Kein update.img für die SD-Card, Beschreibung zum flashen im Archiv.

(RKAndroidTool v.1.29 only for Windows)

Version 1.0 (13.01.2012)

Größe-Gepackt:ca:118,83MB
Share-Online Download---mit Flashanleitung
Alternativer Download---mit Flashanleitung

By fluxflux

hosts angepasst
build.prop angepasst
ext3,rw
Daten Partition von 512 MB auf 1024 MB vergrößert

Entfernte Apps:
Launcher2
Gmail
Email
Standart-Browser
Aldiko-eBookReader

Hinzugefügte Apps:
k9Mail
Dolphin Browser HD
Youtube
GO Launcher EX
ES Datei Explorer
Ghost Commander
TuneIn Radio
Superuser
Titanium Backup Root

Tipp: bei Titanium Backup unter Wiederherstellen die Option "Wiederherstellen fehlender Anwendungen + alle System-Daten" wählen, dann werden keine installierten Apps überschrieben.

Bei fehlerhaften flash und vor dem flashen eines neuen Systems (ext3) zu (ext4) oder (cramFS) und umgekehrt, ein Erase IDB mit dem RKAndroidTool v.1.29 machen.
Änderungen auf dem Loox (apps, einträge etc...) werden erst nach einem Reboot wirksam.

Diese ext3 flash-Updates sind von dem android-hilfe.de Mitglied fluxflux, ich habe sie nur zum Download bereitgestellt und eine Flashanleitung erstellt.

Also Leute bedankt euch bei fluxflux in seinem Thread dafür, in dem ihr dort auf den Danke-Knopf drückt, es war eine menge Arbeit für ihn diese zu erstellen.
61347446.png
Achtung, es wird alles was vorher auf dem Loox war gelöscht!

Bevor es los geht, sollten alle Daten vom Tablet gesichert werden Titanium Backup Root eignet sich hervorragend.
Kopiere dann das update.img auf deine mit FAT-32 formatierte SD-Card.
Nach dem einlegen der SD-Card ins Tablet erscheint eine Meldung, die nach Bestätigung das Update automatisch Installiert.
Es ist ebenso möglich das update.img direkt via USB auf die bereits im Tablet eingesetzte SD-Card zu kopieren.

Before you start you should save all data from your tablet Titanium Backup Root is well suited for this task.
Copy the update.img to your FAT-32 formatted SD-Card.
After inserting the SD-Card into your tablet a message will pop up, and after confirming the update will automatically start.
It is also possible to copy update.img directly via USB to your SD-Card which is already inserted into your tablet.


====================================================================================================

Alte Versionen:
Custom Odys Loox CramFS Update mit Custom Apps
Update.img für die SD-Card, Beschreibung siehe oben.

Version 1205er Modified/Erwin 1.2 (02.05.2012)

Größe:ca:125,12MB
Share-Online Download---Update mit Phone.apk und wendal suRoot

By PopEi

1205er Modified/Erwin

Es befindet sich kein FlashPlayer auf dem Update!
Der FlashPlayer liegt bei und muß anschließend selbst installiert werden.


Tip:
Installiert euch das Taskmanager-Widget vom GO Launcher , das auf
dem Destop zusehen ist, damit könnt Ihr unerwünschte Prozesse von
dort aus stoppen und macht euer Tablet Leistungsfähiger.



Es wurde folgendes entfernt:

Aldiko-Standart-e-BookReader
Standart-Browser
Calculator
Calender
Contacts
DeskClock
AdobeFlashPlayer
Gmail
Launcher
Live-Wallpapers (Live Wallpapers lassen sich generell nicht mehr nutzen)
RKEBookReader
Google-Street



Es wurde folgendes eingefügt:

Superuser Root
Host.txt
AdFree Android 0.8.42 update fähig
Dolphin HD Browser 7.2.1 update fähig
GO Launscher EX update fähig




Es kann sein das die neuen App´s nicht sofort im Market sichtbar sind,
oder erst als nicht installiert angezeigt werden, einfach auf Gratis
klicken und dann auf aktualisieren und macht ein Update, erst dann
stehen sie als installiert.

Ich habe es getestet und es hat ohne Probleme funktioniert!!!!

-------------------------------------------------------PopEi--------------------------------------------------------
Custom Odys Loox CramFS Update mit Custom Apps
Update.img für die SD-Card, Beschreibung siehe oben.

Version 0924er RipRoot 1.0 (04.01.2012)

Größe gepackt:ca:117,36MB
Share-Online Download---Update mit wendal suRoot

By PopEi

0924RipRoot

Es befindet sich kein FlashPlayer in dem Update!

Ein funktionierender AdopeFlashPlayer 10.3 (getestet)
liegt bei und muß anschließend selbst installiert werden.

Achtung FlashPlayer 11 läuft auf diesem Update nicht!!!!!!

Tip: Installiert euch die Widgets vom GO Launcher EX



Folgendes wurde entfernt:

apps:

Aldiko-Standart-e-BookReader
Standart-Browser
Calculator
Calender
Contacts
DeskClock
eManual
AdopeFlashPlayer
Gmail
Standart-Launcher
Phone
RKEBookReader
Google-Street
Maps
usw...


arlarm:

Arlam_Beep_01
" " 02
" " 03
" _Buzzer
" _Classic
" Rooster02


books:

Express_Manual_EN/ES/FR


lang_pico:

en-bin-GB/US/ES/FR/IT


notifications:

Beat_Box_Android.ogg
CaffeineSnake."
DearDeer."
DontPanic"
F1_MissedCall."
usw.....so wie alle Klingeltöne


Es wurde folgendes eingefügt:

Alle Updatefähig!!

Titanium Backup Root
AdFree Android 0.8.42
Go Launcher EX 2.71
Host.txt für den (Werbungsblocker)


build.prop Veränderungen:

ro.product.locale.language=de
ro.product.locale.region=DE
ro.wifi.channels=14
dalvik.vm.heapsize=64m
wifi.supplicant_scan_interval=3600
persist.sys.timezone=Europe/Berlin
EXTERNAL_STORAGE_STATE=/mnt/sdcard



Nach dem ersten installieren aus dem Market werden alle
Programme erkannt, dann auf Gratis klicken und
anschliessend auf Aktualisieren!

Im Ordner liegen Opera und Dolphin HD sowie der
FlashPlayer 10.3 bei.

Mit neuem Superuser und neuer su (aktuell), ermöglicht durch wusel !Danke !!
Custom Odys Loox CramFS Update mit Custom Apps
Update.img für die SD-Card, Beschreibung siehe oben.

Version 1205er BigRip 1.0 (30.12.2011)

Größe-Größe gepackt:ca:113,94MB
Share-Online Download---Update mit wendal suRoot

By PopEi

1205er BigRip

Es befindet sich kein FlashPlayer in dem Update!

Der neue funktionierende AdopeFlashPlayer 11.0.1.152 (getestet) liegt bei und
muß anschließend selbst installiert werden.

Tip: Installiert euch das Taskmanager-Widget vom GO Launcher EX, das auf
dem Destop zusehen ist, damit könnt Ihr unerwünschte Prozesse von dort aus
stoppen und macht eueren Tablet-PC Leistungsfähiger.



Es wurde folgendes entfernt:

apps:

Aldiko-Standart-e-BookReader
Standart-Browser
Calculator
Calender
Contacts
DeskClock
eManual
AdopeFlashPlayer
Gmail
Standart-Launcher
Phone
RKEBookReader
Google-Street


arlarm:

Arlam_Beep_01
" " 02
" " 03
" _Buzzer
" _Classic
" Rooster02


books:

Express_Manual_EN/ES/FR


lang_pico:

en-bin-GB/US/ES/FR/IT


notifications:

Beat_Box_Android.ogg
CaffeineSnake."
DearDeer."
DontPanic"
F1_MissedCall."
usw...so wie alle Klingeltöne


Eingesparter Platz durch den Rip, ca: 42MB
Dazugewonnenen Arbeitsspeicher ca: 55-65 MB


Es wurde folgendes eingefügt:

Go Launcher EX 2.71
Host.txt für den AdFree Android 0.8.42 (Werbungsblocker)


Ich empfehle nach dem Update folgende nützlichen app´s aus dem Market
zu installieren:


AdFree Android
Dolphin Browser HD
Youtube
TuneIn Radio


Es kann sein das der GO Launcher nicht sofort im Market sichtbar ist,
oder erst als nicht installiert angezeigt wird, einfach auf Gratis klicken und
dann auf aktualisieren, erst dann steht er als Installiert.

Ich habe es getestet und es hat alles ohne Probleme funktioniert!!!!


-------------------------------- BigRip-by-PopEi ;) ------------------------------
Custom Odys Loox CramFS Update mit Custom Apps
Update.img für die SD-Card, Beschreibung siehe oben.

Version 1205er Modified 1.0 (28.12.2011)

Größe-Gepackt:ca:123,85MB
Share-Online Download---Update mit wendal suRoot

By PopEi

1205er Modified

Es befindet sich kein FlashPlayer auf dem Update!
Der FlashPlayer liegt bei und muß anschließend selbst installiert werden.


Tip:
Installiert euch das Taskmanager-Widget vom GO Launcher , das auf
dem Destop zusehen ist, damit könnt Ihr unerwünschte Prozesse von
dort aus stoppen und macht euer Tablet Leistungsfähiger.



Es wurde folgendes entfernt:

Aldiko-Standart-e-BookReader
Standart-Browser
Calculator
Calender
Contacts
DeskClock
AdobeFlashPlayer
Gmail
Launcher
Live-Wallpapers (Live Wallpapers lassen sich generell nicht mehr nutzen)
Phone
RKEBookReader
Google-Street



Es wurde folgendes eingefügt:

Superuser Root
Host.txt
AdFree Android 0.8.42 update fähig
Dolphin HD Browser 7.2.1 update fähig
GO Launscher EX update fähig




Es kann sein das die neuen App´s nicht sofort im Market sichtbar sind,
oder erst als nicht installiert angezeigt werden, einfach auf Gratis
klicken und dann auf aktualisieren und macht ein Update, erst dann
stehen sie als installiert.

Ich habe es getestet und es hat ohne Probleme funktioniert!!!!

-------------------------------------------------------PopEi--------------------------------------------------------
Custom Odys Loox CramFS Update
Update.img für die SD-Card, Beschreibung siehe oben.

Version 1205er Host.txt 1.2 (27.12.2011)

Größe-Gepackt:ca:146,10MB
Share-Online Download---Update mit wendal suRoot

By PopEi

Mit eingefügten Host.txt für den AdFree Android (Werbungsblocker)
AdFree Android muß aus dem Market anschließend selbst installiert werden.
Custom Odys Loox CramFS Update
Update.img für die SD-Card, Beschreibung siehe oben.

Version 1205er 1.0 (27.12.2011)

Größe-Gepackt:ca:146,00MB
Share-Online Download---Update mit wendal suRoot

By PopEi
78928374.png
Achtung, es wird alles was vorher auf dem Loox war gelöscht!

Bevor es los geht, sollten alle Daten vom Tablet gesichert werden Titanium Backup Root eignet sich hervorragend.
Kopiere dann das update.img auf deine mit FAT-32 formatierte SD-Card.
Nach dem einlegen der SD-Card ins Tablet erscheint eine Meldung, die nach Bestätigung das Update automatisch Installiert.
Es ist ebenso möglich das update.img direkt via USB auf die bereits im Tablet eingesetzte SD-Card zu kopieren.

Before you start you should save all data from your tablet Titanium Backup Root is well suited for this task.
Copy the update.img to your FAT-32 formatted SD-Card.
After inserting the SD-Card into your tablet a message will pop up, and after confirming the update will automatically start.
It is also possible to copy update.img directly via USB to your SD-Card which is already inserted into your tablet.


====================================================================================================

Original Odys Loox Update
Update.img für die SD-Card, Beschreibung siehe oben.

Version 1205 (05.12.2011)

Größe-Gepackt:ca:145,81MB
Share-Online Download
Alternativer Download

Dieses Update ist nicht für die Grimm Edition des ODYS Loox geeignet!

Änderungen:

- Verbesserte Verbindungsqualität zu AVM Routern.
- Bookmarks bleiben auf dem Startbildschirm gespeichert
- Bessere Unterstützung von Spiele Apps
- Unterstützung für die WLAN Kanäle 12 und 13 ergänzt
Version 0924 (24.09.2011)

Größe-Gepackt:ca:148,10MB
Share-Online Download
Alternativer Download


Original Odys Loox Grimm Edition Update
Update.img für die SD-Card, Beschreibung siehe oben.

Version 1125 (25.11.2011)

Größe-Gepackt:ca:145,97MB
Share-Online Download
ZippyShare Download

====================================================================================================

Original Odys Loox Update
Kein update.img für die SD-Card, Beschreibung zum flashen im Archiv.

Version 1205 (05.12.2011)

Größe-Gepackt:ca:143,03MB
Share-Online Download---mit Flashanleitung
Zippyshare Download---mit Flashanleitung

Dieses Update ist nicht für die Grimm Edition des ODYS Loox geeignet!

Änderungen:

- Verbesserte Verbindungsqualität zu AVM Routern.
- Bookmarks bleiben auf dem Startbildschirm gespeichert
- Bessere Unterstützung von Spiele Apps
- Unterstützung für die WLAN Kanäle 12 und 13 ergänzt
Version 0924 (24.09.2011)

Größe-Gepackt:ca:145,24MB
Share-Online Download---mit Flashanleitung
Zippyshare Download---mit Flashanleitung


Original Odys Loox Grimm Edition Update
Kein update.img für die SD-Card, Beschreibung zum flashen im Archiv.

Version 1125 (25.11.2011)

Größe-Gepackt:ca:141,95MB
Share-Online Download---mit Flashanleitung
Zippyshare Download---mit Flashanleitung

By PopEi





Dieser Beitrag wurde mit Hilfe von mcweck übersichtlicher gestaltet und mit seinen Alternativen Downloads versehen! Danke!
English part by fitsbie, wusel and his friends! Thanks!
Danke an alle anderen User die mich unterstützt haben!

Viel Spaß !!!;)
 
Zuletzt bearbeitet:
  • Danke
Reaktionen: pjozsef54, fjhomberg, Franky2304 und 34 andere
Vielen dank PopEi :)
Ich werds gleich mal ausprobieren...
 
Danke PopEi. Sorry der Nachfrage, aber ist das bis auf die aktuelle su-binary und hosts.txt soweit untouched?
Kannst du bitte dazu mal einen AnTuTu Benchmark (mich würde insbesondere der I/O Wert interessieren) und einen
Nenamark 2 Benchmark hochladen? Danke.


:thumbup:
 
Es ist bis auf den suRoot und des eingefügten Host.txt nichts weiteres verändert worden.


Die Werte kann ich Dir auch nach dem essen mitteilen.

edit> es ist nicht die aktuelle su-binary, sondern die von wendal!!!!!
 
Zuletzt bearbeitet:
Hm,
sry aber irgendwie funktionierts nicht.
Nachde ich (wie beim letzten mal) eine sd karte mit fat32 formatiert habe, dann das image drauf und ab in den loox --> starten.....doch leider keine Abfrage.

Er startet einfach durch und alles ist beim alten....:confused2:
 
Welche von den beiden?
 
Zuletzt bearbeitet:
Update1205suRoot+Host.txt
 
Habs gerade bei mir auf dem Loox und es geht.
Ich lade es mal von rapidshare runter und gucke nochmal, einen moment.


edit> Habs gerade getestet, sobald ich das Update mit der SD-Card reinschiebe kommt Firmware Updating install/Cancel!!!!
Lade es noch mal runter.

Oder kommst du nach dem drücken von install nicht weiter?
 
Zuletzt bearbeitet:
Oh man....sooooorry PopEi *an kopp schlägt*

Die Abfrage kommt ja erst nach entsperrung *g*

Beim ersten mal wars nicht Fat32 Formatiert.....daher dachte ich ich formatiere eine neue sd und hau das img da rauf...

Als es dann ohne abfrage bis zum lock-screen bootete bin ich davon ausgegangen das es gar nicht geht....ohje..

Also nun führt er das update aus :)
 
@Oma7144

shot000002l.png

shot000003n.png

shot000005i.png

shot000006mm.png
 
Zuletzt bearbeitet:
  • Danke
Reaktionen: Oma7144
So, nachdem es nun geklappt hat (dank popEi ;) )
Hab ich auch mal den Antunt und den Nenamark2 durchlaufen lassen, mit folgendem ergebnis:


RTFWT.png





EQ6Q7G.png

RTFWT
 
Zuletzt bearbeitet:
  • Danke
Reaktionen: Oma7144
Grandios. Das ist ein guter Hinweis darauf, daß das Image dann wohl stabil ist (ich hatte beim "Kochen" einige
Versionen, bei denen ich den I/O-Wert und die fps nicht mehr reproduzieren konnte).


:thumbup:
 
  • Danke
Reaktionen: PopEi
Update
 
Ei, dat is ja wie in der Weihnachtsbäckerei ;-)
(sorry mußte ich jetzt mal 'raushauen)

Was sagt denn der I/O-Wert und die fps?


:thumbup:
 
shot000001a.png

shot000002d.png

shot000003.png

shot000004.png

shot000005b.png
 
Zuletzt bearbeitet:
PopEi schrieb:


Hm, das heißt wohl wieder neu rooten *g*
Ist ja schon schick wenn der ganze quatsch weg ist...

Frage: kann ich das einfach so rüberbraten oder muss es in den ausgangszustand?

Frage nebenbei: Habt ihr eine alternative als ebookreader die ihr empfehlen könnt?

@PopEi: Super arbeit :)

P.S.: Was mir aufgefallen ist: Die Dateien werden ja immer kleiner ;)
 
du kannst dir den selben eBookReader free edition im nachhinein installieren, dann müßte er ruhe geben, hoffe ich.
sd card format fat 32 schnell und einfach rüberbraten.
 
Zuletzt bearbeitet:
Gehört wohl eher in einen anderen Thread aber wo ich schonmal hier bin:

Wie läuft das mit dem sichern der apps?
Hatte mir app2sd runtergeladen und so einiges auf die sd karte verschoben.
Nachdem ich deine versionen geuppt habe und alles weg war dacht ich mir: ha macht ja nichts, hab ich ja auf sd karte....aber da sind fast nur leere ordner, zumindest konnt ich keine app wieder auf tab schicken.

Zum Glück hab ich noch Oldschool alles aufgeschrieben was ich hatte ;)

Aber dennoch müsste es doch funktionieren oder?
 
@Subcineast

Titanium Backup root gratis

@Oma7144

melde mich gleich

ja Odys hatte daran gearbeitet, ist wohl so weit.Mit dem schwanken, bin ich noch am beobachten!
achso, hattest Du den auch beim app wechsel (Cooking) das eintrage Datum geändert?(01.01.1970.01.00)
warscheinlich Datum und Uhrzeit?
 
Zuletzt bearbeitet:

Ähnliche Themen

J
  • Jotto94
Antworten
0
Aufrufe
1.345
Jotto94
J
B
  • berry055
Antworten
0
Aufrufe
1.182
berry055
B
B
  • Bochumer86
Antworten
9
Aufrufe
3.312
Mami1973
M
Zurück
Oben Unten