DHD hängt "zu 99%"

trabant013

trabant013

Ambitioniertes Mitglied
0
Eine bessere Fred-Überschrift ist mir nicht eingefallen, sorry.
Folgendes Problem: Nach einer längeren Fahrt am Sonntag (auf der das DHD noch einwandfrei funzte) wollte ich das Gerät abends ausschalten - keine Reaktion. Hab dann erst mal den Akku für 10 Min. rausgenommen. Wieder rein, eingeschaltet, den Ring hochgezogen, und danach - keine Reaktion. Akku 24h raus, eingeschaltet und gleiche Reaktion, nämlich keine. Ich hab´s dann mit einem Factory Reset versucht, ebenfalls ohne Erfolg. Als letztes Mittel hab ich das Original ROM RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe geflasht, aber auch das brachte nichts. Nach dem Einschalten und ziehen des Ringes hängt sich das Teil weg. Darum bitte ich nun um eure Hilfe. Hat jemand eine Idee, wie ich mein DHD wieder lauffähig mache? Würde evtl. ein Downgrade und anschließendes Flashen auf obiges Original ROM helfen? Ich wäre für zahlreiche Hilfen dankbar.
 
Was bitte bedeutet bei Dir hängen?

Wie lange wartest Du?
 
"Hängen" soll soviel heissen wie: es ist keine Aktion mehr möglich. Ich kann keine Eingabe mehr machen. Warten? Tja, wie ich sagte zieh ich den Ring, und dann passiert nichts mehr. Irgendwann wird dann der Screen schwarz, und nach kurzem Druck auf die On/Off-Taste und ziehen des Ringes alles wie gehabt: keine Reaktion.
 
Sieht mir nach Hardwareschaden aus - da hilft wohl nur einschicken.
 
Mittlerweile vermute ich auch so etwas. Ich habe jetzt etliche Factory Resets durchgeführt, diverse ROM´s geflasht - nichts hat geholfen. Dann werd ich´s wohl wirklich einschicken müssen. Gilt es dabei noch irgend etwas zu beachten? Ansonsten vielen Dank für eure Hilfe.
 
- S-On
- Akku & SD-Karte raus (ggf. gibt's was Neues, wenn das Handy zurück kommt :D)
 
Ich glaube zu wissen, worin der Fehler liegt. Nachdem ich ja nicht so leicht aufgebe und zum widerholten Male am Gerät herumgedoktert habe, hatte ich plötzlich Blutstropfen an den Fingerkuppen von Daumen und Zeigefinger. Bei genauerer Betrachtung des Original HTC USB-Kabel ist mir aufgefallen, dass zwei winzig kleine Drähtchen aus dem Kabel heraus guckten. Also nehme ich mal an: Blut -> unisoliertes Kabel -> Kurzschluss. Hab das Gerät mit einem baugleichen Nokia-Kabel angeschlossen, das geht. Einziges Problem: ich krieg das DHD nicht mehr in S-ON, damit ich es einschicken kann. Hab´s mit dem Easy Radio Tool versucht, aber das funktioniert nicht. Hat vllt. jemand eine Idee, wie ich trotzdem in S-ON komme?
 
für radio s-on:
richtige version gehabt? v2.2
als CID "T-MOB101" eingetragen?

für hboot s-on: (xda-devs)
PUTTING BACK STOCK HBOOT & ENG S-ON
--edit Thanks to dazweeja for pointing this out. I've been told replacing the hboot and the recovery image to stock have quite a risk of bricking your phone if anything goes wrong. I'd suggest extra caution making sure you type the commands correctly.--
Tell tale signs your phone is modded are ENG S-OFF on the top line of entering the bootloader and also when you click on recovery it goes though to another list saying Clockwork Recovery. You will also want to remove root (superuser access) during this proccess. Now to remove root you can either run Visionary+ and select Unroot Now or what I did is just redo the step above that was to flash Kazuroka's Vodafone Stock ROM. After reflashing you only need to install a file browser from the market such as Astro or Androzip and then use it to install Visionary+ from you micro SD card. The only option you need to select in Visionary+ is Temproot now. This means root access will be gone after reboot. Now to remove Eng S-Off and put back the stock hboot & recovery image. Download my backup of the original recovery image from here: http://forum.xda-developers.com/atta...1&d=1296394732
Also download my backup of the original HBoot from here: http://forum.xda-developers.com/atta...1&d=1296394732
Extract the two zip files "Original_VHA_HBoot.zip" and "Original_VHA_Recovery_Image.zip" and you will get "recovery_orig0.bin" and "hboot_orig0.bin". Connect your USB cable to your phone and select "Disk drive, Mount as disk drive" and select "Done". The MicroSD card will now pop up as a drive in Windows. Copy the two files "recovery_orig0.bin" and "hboot_orig0.bin" to the new drive that popped up which is your MicroSD card on your phone. Make sure you copy these two files to the root folder of your MicroSD card (root folder means the base not a folder named "root"). After copying these two files, then on your phone, pull down the status menu sliding your finger from the top down. It should say "Ongoing" and underneath Select "Disk drive" now choose "Charge only" then select "Done" and make sure USB Debugging is on (in Menu, Settings, Applications, Development, USB debugging). On your computer open a command prompt and go to the "platform-tools" folder of your Android SDK installation. For me its:
"cd\program files (x86)\android\android-sdk-windows\platform-tools\"
then type
"adb shell"
"su" (if you get permission denied, you have to do run Visionary+ and select temproot now)
"busybox dd if=/sdcard/recovery_orig0.bin of=/dev/block/mmcblk0p21"
"busybox dd if=/sdcard/hboot_orig0.bin of=/dev/block/mmcblk0p18"
"sync" (wait 10 seconds then after that, you can close the command prompt)
Power off phone and then re-enter bootloader. If everything worked you will now see:
ACE PVT SHIP S-ON
HBOOT-0.85.0007
Also you'll notice that System Info is gone and also if you do select RECOVERY it will no longer go to Clockwork Recovery list but instead to a screen showing a picture of a phone with a red exclamation mark. Selecting Recovery means you'll need to pull the battery to reboot your phone. If you don't want to pull the battery, don't select RECOVERY but instead select FASTBOOT then POWER DOWN.
 
Richtige Version (V2.2) wird benutzt. Aber warum soll ich die CID auf T-MOB101 setzen, wenn ich doch ein ungebrandetes Gerät mit der CID HTC__102 habe?
 
oh, sorry, dachte du hättest d1 branding gehabt wegen einschicken ^^
aber guck mal im bootloader was bei dir da bei CID steht.
 
Sorry für mein Unwissen, aber wo kann ich denn im BL etwas über die CID lesen?
 
unter System Info
da kannst du auch gleich mal gucken was direkt im bootloader ganz oben steht.
ship oder eng s-off?
 
Da ich mich nun wirklich nicht so gut auskenne, habe ich einfach mal ein Pic vom Bootloader hochgeladen. Bitte die miese Quali zu entschuldigen.
test2g6iuu.jpg
 

Anhänge

  • test1.jpg
    test1.jpg
    96,3 KB · Aufrufe: 235
guck mal unter simlock ob da was von CID steht.

und dann musst du noch den schritt paar posts vorher unter hboot s-on machen. dann steht oben ...ship s-on, dann kannst du es einschicken.
 
Möchte mich kurz bedanken bei allen, die mir helfen wollten. Leider hat es nicht geklappt, das Handy auf S-On zu bringen. Wahrscheinlich bin ich dafür zu dumm. Dann wird das mit dem Einschicken zu HTC eben nix, das Ding kommt in die Schublade und ich benutze wieder mein altes Nokia.
 
wo genau hängts denn?
 
Hat sich erledigt. Warum? Ich hab gerade mit HTC telefoniert. Ich müsste die Reparaturkosten voll übernehmen, weil ich das Ding in Polen gekauft habe. Garantie hab ich deswegen leider nicht. Also lass ich´s doch lieber gleich. Trotzdem vielen Dank für eure Hilfe.
 

Ähnliche Themen

C
Antworten
4
Aufrufe
1.366
Chris162
C
L
Antworten
2
Aufrufe
1.485
concharge
C
Lemmi
Antworten
1
Aufrufe
1.401
Lemmi
Lemmi
Zurück
Oben Unten