[Anleitung][Essential PH-1] Bootloader entsperren und TWRP installieren

vergilbt

vergilbt

Ikone
7.641
Nachdem der bootloader entsperrt ist:
Anleitung für TWRP:

1. Im fastboot die recovery twrp-mata_11.img flashen
2. In die recovery booten
3. System mounten
4. Original boot.img im twrp auf die boot-Partition flashen
5. Magisk zip flashen
6. Booten und Spaß haben
 
Zuletzt bearbeitet:
Bearbeitet von: Verpeilter Neuling - Grund: Ausgegliedert - Gruß Verpeilter Neuling
  • Danke
Reaktionen: unddasistgutso
Danke.
Aber kein TWRP bisher vorhanden?
 
Nicht das ich wüsste.
 
Wird nicht mehr lange dauern. Geduld. So lange ist das Phone ja noch nicht am Markt.
 
Twrp ist schon da, der Touch funktioniert nur noch nicht von der Twrp Oberfläche.
Findet man im XDA.
 
Zuletzt bearbeitet:
Bearbeitet von: Verpeilter Neuling - Grund: Ausgegliedert - Gruß Verpeilter Neuling
  • Danke
Reaktionen: vergilbt
Geht über OTG und Maus?
Gibt es Links dazu?
 
Schnelltest: mein OTG-Stick wird von "Amaze" ein bisschen erkannt, d.h. die App merkt, das der Stick angesteckt ist, bietet mir aber kein Verzeichnis zur Auswhl an.
Ob das jetzt an der App oder am PH-1 liegt, kann ich nicht sagen.
 
  • Danke
Reaktionen: vergilbt
Meinte mehr OTG im twrp...

Well es ja derzeit keinen Touch bringt...
 
Den Thread auf XDA findet man hier.
Da gibt es auch einem Link zu einer Anleitung um den Bootloader zu entsperren.
 
  • Danke
Reaktionen: vergilbt und Kazama
Es ist für Oreo Beta 1 seit heute ein funktionierendes TWRP erhältlich...
Alles dazu auf xda zu bekommen...

1. Im fastboot die recovery twrp-mata_10.img flashen
2. In die recovery booten
3. System mounten
4. Original boot.img im twrp auf die boot-Partition flashen
5. Magisk zip flashen
6. Booten und Spaß haben


Loading site please wait... Stock Boot Image

https://download.invisiblek.org/mata/twrp-mata_10.img Oreo TWRP

https://forum.xda-developers.com/attachment.php?attachmentid=4302781&d=1508010356 Magisk



Alle credits gehen zu
@aer0zer0 @invisiblek


Achtung: sobald Beta 2 vorhanden ist, müssen die Images angepasst werden
 
  • Danke
Reaktionen: Kazama
Die Downloadlinks sind leider nicht mehr gültig.@vergilbt hast du da evtl. noch den Download für die Oreo 8.1?

Danke.

edit: Sehe gerade das @Kazama die Links in seinem LOS15.1-Thread drin hat. Sollte man evtl. hier in den Startpost einfügen.
[doublepost=1521479367,1521475372][/doublepost]Ich bekomme es gerade nicht hin.

Bootloader entsperrt - check
TWRP installiert - check
Reboot Recovery - TWRP - check
Install LOS 15.1 - check
Install Boot.img - check
Install Magisk 16.0 - check
Reboot System - Failed
Reboot TRWP - failed

Das Stock-Recovery ist wieder drauf. Ich verzweifel gerade.
 
Kann man mit der Differenzierung SlotA und SlotB auch zwei Rom´s parallel installieren? Also Stock-Rom auf SlotA und CustomRom+TWRP auf SlotB?
 
Habe es nur gelesen, aber ich glaube es geht nicht...

Denn du hast zwar zwei Boot Partitionen, zwei Vendor-Partitionen, aber nur eine Data-Partition.
Somit würden beide Rom auf dieselbe Data zugreifen... Und ich glaube, das geht nur bei relativ identischen ROM
 
  • Danke
Reaktionen: Dr.No
Ist also nur eine zweite Recovery-/Boot-Partition als Sicherung drauf. Ok.
 
So wie ich Mal gehört habe, fahren manche mit gleicher Rom einmal gerootet und einmal ohne root...
 
  • Danke
Reaktionen: Dr.No
Lesen, lesen, lesen.

Dann klappt das auch mit Root und dem Neustart ins System. Beim nächsten Update hoffe ich, das ich es endlich verstanden habe. Zumindest bei Custom Roms ist es ziemlich tricky.
 
Brauche mal Hilfe bitte. Bin auf Pie und würde nun gerne TWRP und Magisk drauf machen. Beide Bootlaoder sind geöffnet. Für das September Update braucht man ja ein gepatchtes Boot was ich habe bzw auch twrp. Nur wie geht es nun weiter, bin im Fastboot? Hab es versucht nach xda Anleitung aber das geht nicht:

D:\Software_Tools\Multimedia\Handy-Taplet\Handy\Backup\Download\Recovery>fastboot set_active other
Setting current slot to '`' FAILED (remote: Invalid Slot Suffix)

D:\Software_Tools\Multimedia\Handy-Taplet\Handy\Backup\Download\Recovery>fastboot flash boot TWRP-SEP.img
Sending 'boot__a' (65536 KB) OKAY [ 1.825s]
Writing 'boot__a' FAILED (remote: No such partition.)
Finished. Total time: 1.845s

Edit: So habe nun TWRP zwar drauf aber nach dem ersten boot ins twrp habe ich kein Touch? Kann denn Slider nicht wischen. Ins system kann ich auch nicht mehr hochfahren da es gleich wieder in das twrp booted wo aber eben kein touch geht. Keiner da der Helfen kann bitte? Wäre echt hilfreich wenn es hier einen Thread geben würde wo alles beschrieben wäre.

Nach einen Format Data kann ich zwar in das System booten aber beim Setup habe ich nun auch kein touch. Na toll.

Mit der Back to Stock bin ich nun wieder auf einen funktionierenden Pie mit Touch. TWRP und root wären aber jetzt dennoch schön.
 
Zuletzt bearbeitet:
Vieleicht hilft dir das Video weiter:

Und hier ist die Anleitung bei XDA wegen Touch

OK I FIGURED IT OUT, HOW TO GET TWRP TOUCH WORKING FOR EVERYONE

Explanation of issue:

I finally figured this out after thinking about it too long. I was wrong about some Essentials possibly having different touch screens/digitizers. If you don't want to give yourself a headache, just skip to the instructions below.

The reason it worked for some people, including myself, is we followed the directions and flashed TWRP.img to the non-active slot. The non-active slot for us had August still on it (including the August version of hyp and rpm) which is why touch worked in TWRP.img. Once the TWRP zip installer is used, however, TWRP is installed to the ramdisk of the current boot image, and therefore touch works with September when switching back to the active slot (TWRP.img is built with the boot image of August and hence requires August or older hyp and rpm partitions for touch to work with it, BUT the TWRP zip installer installs TWRP to the ramdisk of the current boot image (kernel), and therefore is compatible with any boot image -- it isn't built on a specific boot image to begin with -- it "injects" your boot image with TWRP and is compatible with any boot image: past, present, or future). So the following instructions will always work to install TWRP with working touch.

How to get touch working in TWRP:


a) Make sure you have September on the active slot (and latest rpm and hyp partitions if you messed with those) and have temporarily removed your lockscreen pattern/pin/password. Also make sure you have the stock boot image on your active slot (in case you had previously installed Magisk). Boot into fastboot.
b) Switch slots and flash twrp-3.2.3-0-mata.img to the non-active slot
c) Boot into twrp
d) Since touch doesn't work in TWRP, issue the following commands from your PC to install the TWRP installer since you can't do it by touching the screen:

adb shell twrp sideload

adb sideload twrp-installer-mata-3.2.3-0.zip

e) Exit back to bootloader after sideload is complete using command:

adb reboot bootloader

f) From bootloader, switch back to Active (September) Slot

Congratulations, you are done and have installed TWRP with working touch on to your active slot!
--When you boot into recovery, you will boot into TWRP and your touch will work.
--When you boot into Android, you can add your lockscreen pattern/pin/password back (and now since touch works in TWRP, you'll be able to enter it next time you boot to TWRP).
--If you wish to install Magisk, simply boot into TWRP and flash magisk.zip (Do NOT flash the stock boot image first or you will have erased all the hard work you just did properly installing TWRP).
--These instructions will need to be repeated everytime you update your boot image (kernel) because TWRP has been installed into your current boot image (kernel).

In case twrp-3.2.3-0-mata.img isn't updated by next month's update (October), save and reuse these instructions to install TWRP to October's boot image (kernel).
 
Zuletzt bearbeitet:

Ähnliche Themen

E
Antworten
20
Aufrufe
1.810
thk_ms
T
E
Antworten
1
Aufrufe
690
Andy
Andy
E
Antworten
83
Aufrufe
4.283
Zipfelklatscher
Z
Zurück
Oben Unten