NvBackup schlägt fehl

K

Karl89

Neues Mitglied
0
Guten Tag ich versuche die ganze zeit n Backup von Hannspad zu machen.
Mache es nach der Anleitung im Forum. Aber bei part 8 bleibt der backup stehen und sagt failed excecuting command an.

Verwender windows 7 64 bit und habe stock restore v3 hergenommen und natürlich den apx modus gestartet.

Hannspad:
1653

Hat jemand ne idee wo rans liegen kann? es mussten ja 13 partion sein und ich hab nur 7.


Gruß Karl
 
Zuletzt bearbeitet:
wenn du die backup Datei mit rechtsklick und bearbeiten öffnest, sieht die ungefähr so aus:
"nvflash.exe" --bl bootloader.bin --getbct --bct hanns.bct --go
"nvflash.exe" -r --getpartitiontable partition.txt
"nvflash.exe" -r --read 2 part-2.img
"nvflash.exe" -r --read 3 part-3.img
"nvflash.exe" -r --read 4 part-4.img
"nvflash.exe" -r --read 5 part-5.img
"nvflash.exe" -r --read 6 part-6.img
"nvflash.exe" -r --read 7 part-7.img
"nvflash.exe" -r --read 8 part-8.img
"nvflash.exe" -r --read 9 part-9.img
"nvflash.exe" -r --read 10 part-10.img
"nvflash.exe" -r --read 11 part-11.img
"nvflash.exe" -r --read 12 part-12.img
"nvflash.exe" -r --read 13 part-13.img
"nvflash.exe" -r --read 14 part-14.img
pause



Dort kannst du dann einmal alle Befehle für die part-X images raus nehmen, ausser der 8. Dann zieht er nur die 8.

So gehst Du dann auch für 9,10,11,12,13 und 14 vor, dann sollte es klappen.

Dann sehe das so aus:
"nvflash.exe" --bl bootloader.bin --getbct --bct hanns.bct --go
"nvflash.exe" -r --getpartitiontable partition.txt

"nvflash.exe" -r --read 8 part-8.img

pause

Erst einmal solltest Du dir die partition Text Datei ansehen. Da steht drin wie viele Du hast. Gibt auch welche die haben nur 10 Partitionen.
 
So ich zeig euch mal hir die
Datein

Backup hanspad Rechte maustaste

"nvflash.exe" --bl bootloader.bin --getbct --bct hanns.bct --go
"nvflash.exe" -r --getpartitiontable partition.txt
"nvflash.exe" -r --read 2 part-2.img
"nvflash.exe" -r --read 3 part-3.img
"nvflash.exe" -r --read 4 part-4.img
"nvflash.exe" -r --read 5 part-5.img
"nvflash.exe" -r --read 6 part-6.img
"nvflash.exe" -r --read 7 part-7.img
"nvflash.exe" -r --read 8 part-8.img
"nvflash.exe" -r --read 9 part-9.img
"nvflash.exe" -r --read 10 part-10.img
"nvflash.exe" -r --read 11 part-11.img
"nvflash.exe" -r --read 12 part-12.img
"nvflash.exe" -r --read 13 part-13.img
"nvflash.exe" -r --read 14 part-14.img

Und Partions textdatei
PartitionId=2
Name=BCT
DeviceId=19
StartSector=0
NumSectors=1536
BytesPerSector=2048


PartitionId=3
Name=PT
DeviceId=19
StartSector=1536
NumSectors=64
BytesPerSector=2048


PartitionId=4
Name=EBT
DeviceId=19
StartSector=1600
NumSectors=1024
BytesPerSector=2048


PartitionId=5
Name=NVC
DeviceId=19
StartSector=2624
NumSectors=1024
BytesPerSector=2048


PartitionId=6
Name=MBT
DeviceId=19
StartSector=3648
NumSectors=64
BytesPerSector=2048


PartitionId=7
Name=BLO
DeviceId=19
StartSector=3712
NumSectors=2048
BytesPerSector=2048


PartitionId=8
Name=MSC
DeviceId=19
StartSector=5760
NumSectors=8192
BytesPerSector=2048


PartitionId=9
Name=KLO
DeviceId=19
StartSector=13952
NumSectors=2048
BytesPerSector=2048


PartitionId=10
Name=OGO
DeviceId=19
StartSector=16000
NumSectors=8192
BytesPerSector=2048


PartitionId=11
Name=SOS
DeviceId=19
StartSector=24192
NumSectors=4096
BytesPerSector=2048


PartitionId=12
Name=LNX
DeviceId=19
StartSector=28288
NumSectors=4096
BytesPerSector=2048


PartitionId=13
Name=APP
DeviceId=19
StartSector=32384
NumSectors=102400
BytesPerSector=2048


PartitionId=14
Name=CAC
DeviceId=19
StartSector=134784
NumSectors=123968
BytesPerSector=2048


So also anscheinend hat mein tablet 14 partionen.
Also ich versuche es mal mit der methode jede einzelnen partion einzeln abzurufen.


ich sag bscheid obs funktioniert hat.
 
so ich hab jetzt die partionen einzelnen gezogen aber part 8 und 14 zeigen read failed an also nicht erfolgreich.

Die andere Vorgehensweise wie im Hilfsforum beschrieben halte ich nicht für sinnvoll weil wenn ich formartiere muss ich neu flashen dann kann ich gleich ohne backup Flashback drauf knallen.

Partion 9 ist anscheinend die recovery file.

hat jemand ne andere lösung für successfull read part 8 un 14


Gruß Karl
 
ne, da kann ich dann auch nichts mehr anbieten, außer meinem Backup :)

Das mit dem formatieren ist auch so gemeint, dass du die beiden Sachen Formatierst und dann per Update zip einmal den Originalzustand herstellst und danach dann ein Backup ziehst.
 
ne passt schon hab einfach n backup über cw mod gemacht hab flaschback 7.2 drauf gehauen aber hat nicht funktionert also wieder recovery gestartet. Orginal zustand wieder.

Mal ne Frage welche android 3 versionen kann ich den benutzen kann ich die version die für Viewsonic G Tablet entwickelt worden sind hernehmen oder muss ich genaue schauen welches auf hannspad optiemiert sind? ich spreche von den die hir im Forum https://www.android-hilfe.de/forum/...-3-x-versionen-aktuell-100-online.134187.html.


gruß karl
 
mikaole schrieb:
die dort beschrieben sind kannst du alle nehmen.
Ich selber benutze Gtabcomb Download GtabComb_b3.3_bl1.2.zip for free on Filesonic.com
und den neuesten Kernel Download ab_kernelv4Release-2-32-44-04.zip for free on Filesonic.com

Am besten ist alle einfach einmal austesten, so habe ich es gemacht. Bin aber immer wieder zurück zu Gtab.

Alle anderen Roms und mehr findest Du auch bei mir unter FileSonic, fast and easy file storage.

Kann dir nur zustimmen...selten so ein stabiles Rom gesehen wie Gtabcomb3.3 allerdings scheint mir flashback 10 doch zumindest ebenbürtig.
 

Ähnliche Themen

M
  • Gesperrt
  • MisterHanki
Antworten
2
Aufrufe
1.136
4dro1d
4dro1d
W
  • Gesperrt
  • Wizard112
Antworten
5
Aufrufe
1.717
4dro1d
4dro1d
S
Antworten
10
Aufrufe
1.750
K3nshiro
K3nshiro
Zurück
Oben Unten