Problem bei Rooten von Milestone 2.1-update1

S

Snaek

Neues Mitglied
0
Aloha!

ich hab das Milestone mit 2.1-update1 und "GAS_EMEA_USASHLS00RTDACH_P022" FW Config - Build number "SHOLS_U2_02.36.0".
beim versuch die update.zip zu entpacken meckert er immer wieder wegen der EOCD Signatur. Ich habe mittlerweile schon mehere update.zip fürs 2.1 ausprobiert, auch aus diversen foren...

Was nun?
Wie kann ich das ding rooten?

Die howtos stellen mehr fragen als sie lösen.
Vorallem stellen die meisten howtos ein Windows vorraus... Ich habe jedoch ausschließlich Linux/BSD systeme...
 
Du hast vermutlich OTA (also via WLAN/UMTS) die neue Version aufgespielt - die überschreibt bei jedem Start das Recovery wenn es verändert wurde.

Kannst Du zum Beispiel mit meinem Mod lösen oder das Script via ADBRecovery manuell löschen (FuFu kennt den Pfad aus dem Kopf denke ich - ich müsste erst nachschauen):

Code:
------------------------------------------------------------------------------
OTA (over the air) update fix ------------------------------------------------
------------------------------------------------------------------------------
If you updated the phone over the air (WLAN, 2G/3G) you can't permanently
flash the vulnerable recovery anymore, because the OTA update has a script
incuded that overwrites the recovery if it was replaced somehow.

This script includes a fix for that by deleting the script that updates the
recovery. To get that script running, try the following method:

01. Copy this script package onto your SD card. DON'T EXTRACT THE UPDATE.ZIP!
02. Boot your phone into the boot loader by holding D-PAD up while switching
    it on. You should enter the boot loader 90.7x. Keep that version of the
    boot loader in mind - we need that information later - to be precise:
    remember if the boot loader is 90.78 (or higher) or not.
03. Connect the phone via USB with your PC - RSD Lite and all needed drivers
    should be already installed previously and the PC restartet afterwards.
04. Start RSD lite. RSD Lite should detect your phone in the list below.
05. Load and extract the vulnerable recovery if you didn't yet. The vulnerable
    recovery is a .SBF file with a size of 3-4 MB.
06. Click onto [...] in RSD Lite and load the SBF file of the vulnerable
    recovery
07. Click 'Flash'
08. Now be quick! The flash of the recovery goes on very quickly. While the
    phone got flashed, it reboots. Press and hold D-Pad up as soon as the
    screen goes black and keep D-PAD up pressed until you're back in the boot
    loader again.
09. RSD Lite displays 'PASS'
10. Now switch off the phone
11. Now we need the information about the boot loader you're asked to remember
    previously. If you have 90.78 or higher, press and hold X on the keyboard,
    otherwise press and hold the camera key. While you hold X or the camera
    key, switch on the phone, but keep the key pressed until you see an
    explaination mark [/!\]. Now release all pressed keys and press VOLUME
    UP + CAMERA once. You shuld get into recovery now.
12. Select "apply update.zip" by pressing D-PAD right/left (witch is then up/
    down since the phone is twisted 90 degrees clockwise in recovery mode).
    and D-PAD center to select.
13. The script should boot-up and inform you that it has removed that nasty
    script, that flashes recovery.
    
Now you can reboot as often as you like without the risk of the recovery being
overwritten.

Alternativ kannst Du SHOLS_U2_02.36.0 manuell flashen (link beim Nandroid in meiner Sig), in dem manuell geflashten SBF ist das Script nicht mit drin.
 
Zuletzt bearbeitet:
öhm, SuFu?!?!
ich hab irgendwo ne RSD Lite alternative für Linux gepostet, wäre ich nicht gerade am Stein online würd ich dir den link suchen...
und dann kannst du auch die how to's locker abarbeiten, eventuell auch meine aktuelle zusammenfassung...


Sent from my Milestone
 
Ist RSDLite nicht WindowsOnly? Oo
jedenfalls finde ich keine tgz für Linux/BSD
 
-FuFu- schrieb:
öhm, SuFu?!?!
ich hab irgendwo ne RSD Lite alternative für Linux gepostet, wäre ich nicht gerade am Stein online würd ich dir den link suchen...
und dann kannst du auch die how to's locker abarbeiten, eventuell auch meine aktuelle zusammenfassung...


Sent from my Milestone

Nice, kannst du den Link bei gelegenheit posten?
Wäre dir sehr dankbar :)
 
ist in dem Thread:
Angst vor update von 2.0.1 auf 2.1

kann den Link leider nicht kopieren, aber sollte etwa 10 Threads unter diesem sein ;)


Sent from my Milestone
 
Zu spät, FuFu :tongue:
 
ich bin ja auch beim Arzt :p mit dem Stein online, nur gprs und hab eigentlich keine lust zu suchen :D


Sent from my Milestone
 
Vielen Dank für den Link :)

FuFu: hossa hoffe es ist nichts ernsthaftes @ Arzt...
 
Soooooo
Ich zieh mir mal die SHOLS_U2_02.36.0_UCASHLSMR2EMEAB1B806D.0R_PDS003_USASHLS00RTDACH_P022_A016_HWp2a_1FF.sbf und flashe dann mit sbf_flash den Stein.... mal sehen was passiert :D
 
Nimm lieber die O2, das gibt weniger probleme mit dem Market.
 
ook - also die O2 :)
 
btw. wo ist denn der unterschied?
 
nix schlimmes ^^ Augenarzt :D ich seh gerade aus als wenn ich voll auf Drogen bin :D und ich kann kaum richtig sehen ^^

naja, unterschiede O2 und DACH ist kein echter da, bis auf minimale unterschiede (bookmarks im browser, apns (sind aber für alle provider normalerweise drin)) aber die O2 Version hat echt weniger probleme was den market angeht, warum genau weis niemand so wirklich ^^

und nach dem flashen, das flashen der alten recovery nicht vergessen damit du rooten kannst ;)
 
hehe kiff nicht zu viel ;P

Danke für die erläuterung :)
binn bei DACH geblieben weil er O2 nicht wollte (fragt nicht wieso... ich schüttle grad den kopf)
bin gerade dabei die Alte Recovery rauf zu flashen :)
 
ich hab den Drogen vor längerer Zeit schon abgeschworen ^^ sonst könnte ich mir ja keinen Stein leisten :D

hmm, warum er die o2 nicht wollte gute frage ^^ vielleicht defekter download gewesen ^^ aber die DACH läuft ja auch ;)

das flashen der recovery dauert ja nicht lange ^^ dann noch rooten und fertig :D
 
So, jez hab ich 4 verschiedene update.zip's xD
einfach mal alle durchtesten - mal mit der 39,4MB anfangen danach runter zue 30,3MB...
*dumdidum*
 
kewl - "Cannot find update_binary"
Next one...
 

Ähnliche Themen

G
Antworten
4
Aufrufe
1.356
Gutt
G
P
Antworten
8
Aufrufe
1.914
-FuFu-
-FuFu-
A
Antworten
0
Aufrufe
1.539
AndreaDoria
A
Zurück
Oben Unten