[ROM]LP 5.0.2][ZOMBi-POP OMNI KANG

Keron

Keron

Erfahrenes Mitglied
81
nC21CFE.png

redLine.png

YOU MUST BE ON THE HAIRYBEAN 2.31 JB 4.2.1 BOOTLOADER VERSION 10.6.1.27.1 AND TWRP 2.8.0.0.+ OR CWM 6.5.0.0+ BEFORE FLASHING THIS ROM. SEE UPGRADE INSTRUCTIONS BELOW IF YOU ARE UNSURE
redLine.png


redLine.png

You must do a full wipe in recovery if coming from another ROM. Do not do a full wipe from the bootloader. Don't forget to do a Nandroid Backup first and give the ROM 15 mins to stabilise! The first boot will take 15 minutes!
redLine.png


Features and Tweaks
  • This ROM is based from OMNI AOSP sources
  • Supports EXT4 and F2FS Data partitions
  • Based off omni-5.0.2-20150127-zombi_tf300t-KANG source by lj50036/hardslog
  • Full Aroma Installer for main rom including choice of 4 kernels and ROM2SD/DATA2SD/F2FS support
    smile.gif
  • Remixed _thatv11 kernel with OMNI ramdisk - repacked by sbdags
  • Grimlock kernel with OMNI ramdisk and _that init - by hardslog
  • DPI Size: 160 (TF201 recommended small fonts), 240 (Stock fonts), 224 (Medium fonts) & 200 (Small fonts), 180 (Tiny fonts) & 160 (Specsavers fonts)
  • Launchers: Omni, Google Experience Launcher, Apex , Nova
  • Boot Animations: ZOMBi-POP, Android-L, Nexus Phase Beam
  • Gapps (updated by me to Google latest apks and libs)
  • Misc Apps: ESFile Explorer, Adobe Flash, AdAway, Titanium Backup, Keyboard Manager
  • Tweaks: File system and performance optimised, Init.d support, Zip Align, Force GPU Rendering, Browser2RAM
  • Continued Best Support of any ROM!

  • Warning - experimental tweaks
  • Option to enable / disable data journaling on /data during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
  • Option to enable / disable fsync during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
  • Tip 1: Go to Settings - About Tablet, Click build number 7 times
    Now you will see Developer Settings & Performance menus

    Bug List
  • Some DOCK special keys not working
  • No Floating windows yet
  • Grimlock kernel is buggy at present and can cause soft reboots


UPGRADE INSTRUCTIONS

Steps

1. Refer to the bottom of post #3 UPGRADE FROM STOCK BOOTLODER

2. If you haven’t yet, unlock your TF201 by following these instructions.

3. Install the latest version of Team Win Recovery Project (TWRP) 2.7+ or ClockWorkMod Recovery 6.0.5.0+ Note this ROM will NOT install with older versions of recovery!


TWRP HOME

Download the recovery file from above, put it into the same folder where you have adb and fastboot files. Please rename it to twrp.blob or cwm.img and follow the instructions below:

Quote:
Code:
adb reboot bootloader
To flash the recovery:

Code:
fastboot -i 0x0B05 flash recovery cwm.img
or

Code:
fastboot -i 0x0B05 flash recovery twrp.blob
A blue bar will go accross the screen on the tab and the command prompt will indicate it was successful in about 10 seconds

Then reboot the tablet either back to the bootloader or to android to complete

Code:
fastboot -i 0x0B05 reboot-bootloader fastboot -i 0x0B05 reboot
You can now access the recovery by pushing [volume up] on the RCK icon in the bootloader screen

FLASHING THE ROM FROM RECOVERY

Steps

1. Download the ROM below and save to your internal or external SD Card. Do not unzip the file.

ZOMBi-POP ROM DOWNLOAD
Note: The first boot after install will take 15 mins whilst everything is built. Some people might think it is looping but it is not. The ROM also takes about 15 mins to stabilise after the first boot

ZOMBi-POP Beta 2 20150127 Full Mirror 1

ZOMBi-POP Beta 2 20150127 Full Mirror 2


MD5 Sum: 70306c0b1e94031dbfb2bc12b3737616

FILES ARE SIGNED. IF YOU ENABLE SIGNATURE VERIFICATION IN RECOVERY IT WILL VALIDATE THE FILE BEFORE FLASHING.




[ROM]★[TF201 LP 5.0.2][ZOMBi-POP OMNI … | Asus Eee Pad Transformer Prime | XDA Forums

Anleitung:

-Erstmal ein Backup machen.

-Dann den Bootloader von Hairybean im Recovery flashen. Mirror 1

-Anschließend das Recovery auf Version 2.8.4 updaten

(muss die Version vom tp301 sein nich vom tp201) am besten mit Fastboot.
Techerrata Downloads - Downloading openrecovery-twrp-2.8.4.0-tf300t.blob

-Anschließend Format Data und alles wipen (ca 30 min oder so).

-Zum Schluss die Rom flashen. Obersten Kernel wählen (Grimlock). -Neustarten.

-Wenn außer dem Bootlogo länger nix kommt einfach nochmal aus und wieder an.
 
Zuletzt bearbeitet:
  • Danke
Reaktionen: K-M-T

Ähnliche Themen

T
Antworten
3
Aufrufe
2.524
Trolli91
T
M
Antworten
3
Aufrufe
3.156
K-M-T
K-M-T
G
  • Galaxini
Antworten
2
Aufrufe
2.164
seneca
S
Zurück
Oben Unten