starbase64
Ikone
- 6.514
banner by jonas2295
Hallo,
da der NCX Kernel ebenfalls viele Möglichkeiten bietet,
habe ich mal einen Thread erstellt.
Info/Kontakt
Dev Thread: HTC One X > [KERNEL 07 03 13] ncx_314_v24b JB Kernel_3.1.10 > XDA
GitHub: https://github.com/n3ocort3x/endeavoru_3.14
Hinweise
Installationsanleitung: https://www.android-hilfe.de/forum/...es-kernels-fuer-beginner-26-06-12.244545.html
Downloads
IceColdJelly AOKP | Downloads
NCX Kernel Archiv: NCX
Repacks
HTC One X > [KERNEL][7 MAR] NCX Repacks Thread > XDA
Changelog
ncx-314_v1
-initial release
ncx_314_v3
-attempt to fix sound and bluetooth
ncx_314_v4
- fixed audio
ncx_314_v5
-fixed hotplugging (all governors should work now, all CPUS came online @ bench)
-added VOLUME WAKE (be sure to enable it in ROM too)
-fixed multitouch
ncx_314_v6
-fixed cpu governor change issue
-all cpus use now the same governoDONT FLASH ON SENSEr
-added USB fastcharge
ncx_314_v7
-added Voltage control
-GPU now @ 520 MHZ (please test), Also 484MHz and stock is added in code so i can compile in no time (plan to provide 3 versions)
-some compiler cleanups (only important for me, user aren´t affected from this)
ncx_314_v8
- fixed GPU scaling, sorry guys now it scales up to 520
just tested
ncx_314_v9
- raised gpu low freq to 250MHz
- enjoy a new level of UI smoothness
ncx_314_v11_b
- added bfq I/O sched
- set bfq to default sched
- added cfq I/O sched
- added deadline I/O sched
- tweaked deadline
ncx_314_v13
- fixed setting ondemand and bfq on boot
- patchset to fix light sensor issues on AOSP (thx Thömy)
- integrated s2w -> finally
ncx_314_v13_c
- fixed starting apps and not booting issue
ncx_314_v14
- enabled KSM
- AUDIO FM FIX from tbladen
- tweaked deadline more
- tweaked lowmemory killer
ncx_314_v15
- fix button backlight lag (thx tbalden)
- UMS read-only mode fixed to Read-Write (Usb mass storage works correctly now, also here -> thx tbalden
ncx_314_v16
- disabled interactive on early suspend (solves the issue that 2 different govs are used on resume)
- added n3ocold governor (peqasusq port)
ncx_314_v16c
-solved reboot issue when switching to n30c0ld governor (thx max for teaching ) -> Attention: its still buggy, it stays on the freq thats online when switching (no up down scaling) DONT SWITCH TO IT, ITS ONLY FOR ME AND MAX FOR DEBUGGING
-added smartmax governor from maxwen
ncx_314_v16d
- fix to get cpu out of g mode in LP mode (thx for pm max)
- sound cleanups
ncx_314_v17b
- replaced nv hotplugging with mpdecision (thx, showp-1984, maxwen)
- Disable OS check for the mass storage gadget, thx at thömy
ncx_314_v18
- MERGE a pull request by LorD ClockaN:
- tegra_pcm -> supports audio up to 32 bit
- Spirit FM fix (untested)
- added smartdimmer (Tripnraver)
- updated graphics driver (Tripnraver)
- set core to 0,95V on LP1 (Tripnraver)
- added a GPU OC Interface (you are now able to choose ur GPU speed on your own)
- standard GPU clock is still 520 MHz (info how to change will be available in
ncx_314_v19_AOSP
- reverted graphics patch as it messes up stuff on AOKP
- set smartdimmer to disabled by default (u can enable it on ur own with some apps or the following command):
- echo "1" > /sys/devices/tegradc.0/smartdimmer/enable
- use old ICS Audio drivers (please report on Spirit FM)
ncx_314_v19_SENSE
- reverted graphics patch as it messes up stuff on SENSE
- set smartdimmer to disabled by default (u can enable it on ur own with some apps or the following command):
- echo "1" > /sys/devices/tegradc.0/smartdimmer/enable
ncx_314_v20c_AOSP
-added SIO IO sched
-added ROW IO sched and set default (great perfromance)
-updated maxwens smartmax-gov to latest version
-UV´ed core_vdd (GPU,EMC,AVP) -50mV by default as I did in old base
ncx_314_v21_AOSP AND SENSE
- Added and enabled JRCU
- latest interactive governor from XMISTER (3.4 baseline + optimizations from XMISTER -> great Job, awesome dude )
- set smartmax a bit more aggressive (but still the best for battery)
- no more replug of fastcharge needed (thx maxwen)
- battery life should improove with this version while containing power also
- SENSE Ramdisk from latest RENOVATE ROM, AOSP RAMDISK from latest CM10.1 (every AOSP build use this atm)
ncx_314_v21b_AOSP AND SENSE
- hopefully freezes and bootloops are gone
ncx_314_v22_AOSP AND SENSE
- added CPU HARDCAP (seting freq with every app works now), thx to maxwen, xmister, nik3r, kozmikkick, showp-1948, faux, TripnRaver
- added ZRAM
- removed buggy governors perfromance and powersave
- switch from KSM to UKSM
- slow button backlight notification patch from tbalden and thoemy out of gerrit
ncx_314_v23_AOSP AND SENSE
-set bootup freq to 1300 MHZ (best for smoothness and power)
-switched to CPUQUIET hotplugging
-enabled SWAP and ZRAM (double checked both now)
- be sure to run this script for working SWAP and ZRAM (thx again Kozmikkick): Dev-Host - 90zram - The Ultimate Free File Hosting / File Sharing Service place it in etc/init.d folder or run it manually
ncx_314_v24b_AOSP AND SENSE
-updated wifi drivers to 03.SP3 (thx TI , and kozmickkick for finding out )
-added touchdemand governor
-added intellidemand governor
-gave a bit more responsivness to intellidemand
-added sysfs interface for changin min audio freq while screen on (for the stutter guys) (thx maxwen)
-cpuquiet: added LP hysteresis and logging (thx maxwen)
-cpuquiet: LP hysteresis update (thx maxwen)
- fixed missing I/O Scheds
special thanks here to maxwen... OneX wouldnt be that way without this guy !
-initial release
ncx_314_v3
-attempt to fix sound and bluetooth
ncx_314_v4
- fixed audio
ncx_314_v5
-fixed hotplugging (all governors should work now, all CPUS came online @ bench)
-added VOLUME WAKE (be sure to enable it in ROM too)
-fixed multitouch
ncx_314_v6
-fixed cpu governor change issue
-all cpus use now the same governoDONT FLASH ON SENSEr
-added USB fastcharge
ncx_314_v7
-added Voltage control
-GPU now @ 520 MHZ (please test), Also 484MHz and stock is added in code so i can compile in no time (plan to provide 3 versions)
-some compiler cleanups (only important for me, user aren´t affected from this)
ncx_314_v8
- fixed GPU scaling, sorry guys now it scales up to 520
just tested ncx_314_v9
- raised gpu low freq to 250MHz
- enjoy a new level of UI smoothness
ncx_314_v11_b
- added bfq I/O sched
- set bfq to default sched
- added cfq I/O sched
- added deadline I/O sched
- tweaked deadline
ncx_314_v13
- fixed setting ondemand and bfq on boot
- patchset to fix light sensor issues on AOSP (thx Thömy)
- integrated s2w -> finally
ncx_314_v13_c
- fixed starting apps and not booting issue
ncx_314_v14
- enabled KSM
- AUDIO FM FIX from tbladen
- tweaked deadline more
- tweaked lowmemory killer
ncx_314_v15
- fix button backlight lag (thx tbalden)
- UMS read-only mode fixed to Read-Write (Usb mass storage works correctly now, also here -> thx tbalden
ncx_314_v16
- disabled interactive on early suspend (solves the issue that 2 different govs are used on resume)
- added n3ocold governor (peqasusq port)
ncx_314_v16c
-solved reboot issue when switching to n30c0ld governor (thx max for teaching
) -> Attention: its still buggy, it stays on the freq thats online when switching (no up down scaling) DONT SWITCH TO IT, ITS ONLY FOR ME AND MAX FOR DEBUGGING-added smartmax governor from maxwen
ncx_314_v16d
- fix to get cpu out of g mode in LP mode (thx for pm max)
- sound cleanups
ncx_314_v17b
- replaced nv hotplugging with mpdecision (thx, showp-1984, maxwen)
- Disable OS check for the mass storage gadget, thx at thömy
ncx_314_v18
- MERGE a pull request by LorD ClockaN:
- tegra_pcm -> supports audio up to 32 bit
- Spirit FM fix (untested)
- added smartdimmer (Tripnraver)
- updated graphics driver (Tripnraver)
- set core to 0,95V on LP1 (Tripnraver)
- added a GPU OC Interface (you are now able to choose ur GPU speed on your own)
- standard GPU clock is still 520 MHz (info how to change will be available in
ncx_314_v19_AOSP
- reverted graphics patch as it messes up stuff on AOKP
- set smartdimmer to disabled by default (u can enable it on ur own with some apps or the following command):
- echo "1" > /sys/devices/tegradc.0/smartdimmer/enable
- use old ICS Audio drivers (please report on Spirit FM)
ncx_314_v19_SENSE
- reverted graphics patch as it messes up stuff on SENSE
- set smartdimmer to disabled by default (u can enable it on ur own with some apps or the following command):
- echo "1" > /sys/devices/tegradc.0/smartdimmer/enable
ncx_314_v20c_AOSP
-added SIO IO sched
-added ROW IO sched and set default (great perfromance)
-updated maxwens smartmax-gov to latest version
-UV´ed core_vdd (GPU,EMC,AVP) -50mV by default as I did in old base
ncx_314_v21_AOSP AND SENSE
- Added and enabled JRCU
- latest interactive governor from XMISTER (3.4 baseline + optimizations from XMISTER -> great Job, awesome dude )
- set smartmax a bit more aggressive (but still the best for battery)
- no more replug of fastcharge needed (thx maxwen)
- battery life should improove with this version while containing power also
- SENSE Ramdisk from latest RENOVATE ROM, AOSP RAMDISK from latest CM10.1 (every AOSP build use this atm)
ncx_314_v21b_AOSP AND SENSE
- hopefully freezes and bootloops are gone
ncx_314_v22_AOSP AND SENSE
- added CPU HARDCAP (seting freq with every app works now), thx to maxwen, xmister, nik3r, kozmikkick, showp-1948, faux, TripnRaver
- added ZRAM
- removed buggy governors perfromance and powersave
- switch from KSM to UKSM
- slow button backlight notification patch from tbalden and thoemy out of gerrit
ncx_314_v23_AOSP AND SENSE
-set bootup freq to 1300 MHZ (best for smoothness and power)
-switched to CPUQUIET hotplugging
-enabled SWAP and ZRAM (double checked both now)
- be sure to run this script for working SWAP and ZRAM (thx again Kozmikkick): Dev-Host - 90zram - The Ultimate Free File Hosting / File Sharing Service place it in etc/init.d folder or run it manually
ncx_314_v24b_AOSP AND SENSE
-updated wifi drivers to 03.SP3 (thx TI , and kozmickkick for finding out )
-added touchdemand governor
-added intellidemand governor
-gave a bit more responsivness to intellidemand
-added sysfs interface for changin min audio freq while screen on (for the stutter guys) (thx maxwen)
-cpuquiet: added LP hysteresis and logging (thx maxwen)
-cpuquiet: LP hysteresis update (thx maxwen)
- fixed missing I/O Scheds
special thanks here to maxwen... OneX wouldnt be that way without this guy !
MfG
starbase64
Zuletzt bearbeitet:
