[KERNEL][Samsung][4.4.2 TW] [20. September] Nadia Kernel r7 by Emotroid Team

  • 40 Antworten
  • Neuester Beitrag
Diskutiere [KERNEL][Samsung][4.4.2 TW] [20. September] Nadia Kernel r7 by Emotroid Team im Kernel für Samsung Galaxy Note 2 im Bereich Root / Custom-ROMs / Modding für Samsung Galaxy Note 2.
redbull1

redbull1

Lexikon
[KERNEL][Samsung][4.4.2 TW] [20. September] Nadia Kernel r7 by by Emotroid Team​


WICHTIGER HINWEIS:
Weder ich, noch Android-Hilfe.de, übernehmen eine Garantie auf Erfolg
oder die Haftung für jegliche Beschädigungen an eurem "Note 2 (N7100)".
Wenn ihr nicht sicher seit, was ihr macht, könnt ihr hier gerne Fragen stellen, aber wenn ihr danach immer noch nicht genau wisst, was ihr tut: Lasst es bleiben!
Daher flashen auf eigene Gefahr.


Kernellogo



Changelog und Features
September- 20 -2014 nightly r7
- Zzmoove updated to V0.9 beta4
- Corrected L1 cache shift
- Increased force_max_zoneorder to 12
- Disabled multicast when is sleeping
- cleaned some files
- sched_fair: reduced latency
- sched_fair: optimized cgroup_pick_next_task_fair()
- sched_fair: implemented smarter wake-affine logic
- cpuidle: removed cross-cpu IPI by new latency request.
- Added extra free kbutes tunable
- Added Xbox controller support as module
- Added NTFS support as module
- Added support to ppp-widget
- Enabled max freq for busfreq opp
- Added early suspend delay to userspace
- Updated mali driver to r3p2 rel4
- Added key disabler for cypress-touchkey
- Enabled negative mode compatibility of newer MDNIE drivers (Synapse)
- Added new page in Synapse for Live Statistics (Time in states, Uptime,etc.)
- /sbin nadia.sh values moved to init.d




Synapse and all available options:

- LIVE STATISTICS: Time in states, Uptime,etc.
- CPU - GOV: current frequency, CPU and Battery temperatures, current CPU cores online, CPU MAX and MIN frequency, CPU Governor, Governor tunables.
- CPU voltage: separate frequency voltage.
- GPU: GPU scaling freqyency and treshold steps.
- I/O: schedulers, internal storage read-ahead, externalSD read-ahead and Dynamic FSYNC.
- CPU DRIVERS: cpu multicore power saving, cpu idle mode, logger mode, touchboost settings.
- ABB settings
- Kernel tweaks: low memory killer, kernel entropy, panic and panic on oops.
- NETWORK: tcp congestion control, hardering the TCP/IP stack to SYN attack,ignore pings,etc.
- VM-FS: dirty radio, swappiness,etc.
- BATTERY: charge control
- SOUND: Wolfson Sound control
- MDNIE: mdnie mode and scenario
- LED: Blinking effect, led intensity and spee led.
- Touchwake: touchwake config
- INFO-reboot: info about kernel,etc.


1 - August - 2014 nightly r6.1.1:
- fixed HDMI Audio issue

July 31 2014 r6.1
- sysfs interface to Enable / Disable CRC

July- 04 -2014 nightly r5

- Based on new Samsung source code XXUFND3
- Kernel compiled with Toolchain GCC 4.7
- Retain only online cpus in manage_policy->cpus
- irq: Set CPU affinity as soon as the irq thread is created
- lowmemorykiller: Changed default debug_level to 1
- Network speed tweaked
- Dynamic Fsync updated to v1.1
- Notification LED controls
- Zzmoove updated to v0.9 beta2
- earysuspend: speedup late resume (faster wakeup of the device)
- sched_fair: Reduced latencies
- CPU OC to 2000MHz and moved sysfs uV to cpufreq.c
- Wolfson Sound Control
- Synapse support


Synapse and all available options:

- CPU - GOV: current frequency, CPU and Battery temperatures, current CPU cores online, CPU MAX and MIN frequency, CPU Governor, Governor tunables.
- CPU voltage: separate frequency voltage.
- GPU: GPU scaling freqyency and treshold steps.
- I/O: schedulers, internal storage read-ahead, externalSD read-ahead and Dynamic FSYNC.
- CPU DRIVERS: cpu multicore power saving, cpu idle mode, logger mode, touchboost settings.
- ABB settings
- Kernel tweaks: low memory killer, kernel entropy, panic and panic on oops.
- NETWORK: tcp congestion control, hardering the TCP/IP stack to SYN attack,ignore pings,etc.
- VM-FS: dirty radio, swappiness,etc.
- BATTERY: charge control
- SOUND: Wolfson Sound control
- MDNIE: mdnie mode and scenario
- LED: Blinking effect, led intensity and spee led.
- Touchwake: touchwake config
- INFO-reboot: info about kernel,etc.


June- 13 -2014 nightly r4
F2FS support
GPU frequency and sys interface fixed
power: neutered the cpufreq min samsung interface
power: reduce regulator initializations to regulator minima
sched/nohz: Rewrite, fix and add more accurate load-avg computation
Introduce timer slack controller
Zzmove updated to v0.8
Lulzactiveq updated and added sys screen_off_max_step
sched: Ensure cpu_power periodic update
cpupower: update the cpu_power according to cpu load
ARM: 7011/1: Add ARM cpu topology definition
block/blk-core: add support for Linux 3.0.x for urgent request handling
block: Add support for reinsert a dispatched req
Multicore Power Saving 0 by default
For more info check my github

2-June -2014
r3
[changed]GPU OC/uV (Thanks to DerTeufel and Yank555.lu)
Added scripts in init.d for the GPU OC and uV
Proportional Rate Reduction for TCP
Buqfreq: Use cpu_load_slope correctly (Thanks to AndreiLux)
Added zzmoove governor
Allocate boot (MMC) partitions on probe
Increase timeout limits for bad sdcard
Add sysfs interface to Enable / Disable Android Logger (Thanks to AndiP)
Asynchronous I/O latency to a solid-state disk greatly increased between the 2.6.32 and 3.0 kernels
Forced Fast Charge (Thanks to Yank555.lu)
Reduced wakelock
Added cpu-boost driver
Implemented Touchwake v1.1a and Touch boost
Added slide2wake (Thanks to DerTeufel)
Cpufreq & hotplug updates
tmpfs: fix mempolicy object leaks
LOAD_FREQ (4*HZ+61) avoids loadavg Moire
Optimized ARM RWSEM algorithm
reg: Fixed memory leak
Optimized square root algorithm
Added ARM optimized crypto algorithms
mm:backing-dev tweak
Deadline iosched updated and tuning
writeback: fix occasional slow sync
Drecreased time to enter sleep
Softirq: reduced latencies

May 28 nightly beta r3 :
GPU OC/uV (Thanks to DerTeufel and Yank555.lu)
Proportional Rate Reduction for TCP
Buqfreq: Use cpu_load_slope correctly (Thanks to AndreiLux)
Added zzmoove governor
Allocate boot (MMC) partitions on probe
Increase timeout limits for bad sdcard
Add sysfs interface to Enable / Disable Android Logger (Thanks to AndiP)
Asynchronous I/O latency to a solid-state disk greatly increased between the 2.6.32 and 3.0 kernels
Forced Fast Charge (Thanks to Yank555.lu)

May 24 nightly r2 :
lib/memcopy and lib/string use glib version
Added charger control
Added Boeffla Sound Engine 1.6.5
Added Lulzactiveq governor
Added Sysfs_helpers: Allow negative values
added Advanced TCP: westwood by default

May 22 nightly r1 :

Based on Samsung Source code SEA_KK_Opensource
Overclock to 1920MHz
Default scheduler = Cfq
Default governador = Pegasusq
Cpu = 1600/200
CPU voltage control
Dynamic FSyn control
Reduced battery-monitor wakelock timeouts
Added SIO, ZEN and ROW
Disabled debug kernel
Adaptive Body Bias control
Improved performance
Fixed cpu scaling above max frequency
Increase readahead value to 1024Kb

Download

Originalthread
 
Zuletzt bearbeitet:
Olli von G

Olli von G

Experte
@redbull Wie läuft der kernel hast du den schon getestet?

Gesendet von meinem GT-N7100 mit der Android-Hilfe.de App
 
redbull1

redbull1

Lexikon
Jo habe ich, der läuft sehr gut. Bissel weniger Einstellungen aber echt gut zu konfigurieren mit trickster.
 
Olli von G

Olli von G

Experte
Dann werde ich ihn mal testen mit der neuen omega

Gesendet von meinem GT-N7100 mit der Android-Hilfe.de App
 
redbull1

redbull1

Lexikon
Update:
R3 - 2-June-2014

Startpost aktuell!
 
redbull1

redbull1

Lexikon
Update:
r4 - 13-Juni-2014

Startpost aktuell!
 
Astra-Celly

Astra-Celly

Stammgast
Gerade neueste Version geflasht jetzt ist root weg

Der ursprüngliche Beitrag von 22:11 Uhr wurde um 22:19 Uhr ergänzt:

Jut einfach nachflashen xD

Kann mir jemand paar Dinge nennen die man für flüssiges arbeiten aber zum akkusparen einstellen sollte
 
Astra-Celly

Astra-Celly

Stammgast
Trickster speichert meine Einstellung nach einem Reboot nicht bzw is wider alles Standard
 
S

schlurfi

Stammgast
musst du in den einstellungen einstellen was er beim booten übernehmen soll
 
Astra-Celly

Astra-Celly

Stammgast
Und wo ;)
 
S

schlurfi

Stammgast
glaub oben links war das menu zum aufklappen....zur not menutaste am handy und dann passende haken setzen

hab zur zeit nur den agni drauf
 
Astra-Celly

Astra-Celly

Stammgast
Gefunden geht nur in spenden version
 
S

schlurfi

Stammgast
hmmmm moment ich flash mir mal den neuen

Der ursprüngliche Beitrag von 19:45 Uhr wurde um 19:48 Uhr ergänzt:

ok sorry rechts oben :=)
 
Astra-Celly

Astra-Celly

Stammgast
Was muss ich da einstellen

Der ursprüngliche Beitrag von 19:20 Uhr wurde um 19:20 Uhr ergänzt:

Gefunden Danke xD dachte das is ne schaltfläche

Der ursprüngliche Beitrag von 19:20 Uhr wurde um 19:22 Uhr ergänzt:

Ähm die schnelladen Funktion is die schädlich ?

Und wieso steht da kein Zugriff auf Geräte Speicher
 
DirtyKlot

DirtyKlot

Ehrenmitglied
Astra-Celly schrieb:
Ähm die schnelladen Funktion is die schädlich ?
Sagen wir es so: Für dein Handy ist die Funktion nicht schädlich, denn dann nimmt dein Handy am PC-USB den Ladestrom auf, als würde es an der Steckdose hängen. Lediglich nicht jede PC Hardware verkraftet solch starke Ladeströme über USB.
 
S

stevebiker

Lexikon
Bzw. stellt sie überhaupt zur Verfügung!
 
redbull1

redbull1

Lexikon
Startpost update erfolgt am WE.

July- 04 -2014 nightly r5

- Based on new Samsung source code XXUFND3
- Kernel compiled with Toolchain GCC 4.7
- Retain only online cpus in manage_policy->cpus
- irq: Set CPU affinity as soon as the irq thread is created
- lowmemorykiller: Changed default debug_level to 1
- Network speed tweaked
- Dynamic Fsync updated to v1.1
- Notification LED controls
- Zzmoove updated to v0.9 beta2
- earysuspend: speedup late resume (faster wakeup of the device)
- sched_fair: Reduced latencies
- CPU OC to 2000MHz and moved sysfs uV to cpufreq.c
- Wolfson Sound Control
- Synapse support


Synapse and all available options:

- CPU - GOV: current frequency, CPU and Battery temperatures, current CPU cores online, CPU MAX and MIN frequency, CPU Governor, Governor tunables.
- CPU voltage: separate frequency voltage.
- GPU: GPU scaling freqyency and treshold steps.
- I/O: schedulers, internal storage read-ahead, externalSD read-ahead and Dynamic FSYNC.
- CPU DRIVERS: cpu multicore power saving, cpu idle mode, logger mode, touchboost settings.
- ABB settings
- Kernel tweaks: low memory killer, kernel entropy, panic and panic on oops.
- NETWORK: tcp congestion control, hardering the TCP/IP stack to SYN attack,ignore pings,etc.
- VM-FS: dirty radio, swappiness,etc.
- BATTERY: charge control
- SOUND: Wolfson Sound control
- MDNIE: mdnie mode and scenario
- LED: Blinking effect, led intensity and spee led.
- Touchwake: touchwake config
- INFO-reboot: info about kernel,etc.


Mediafire
Mega
 
Astra-Celly

Astra-Celly

Stammgast
Mal ne dezente frage vorher war ja buffolo sound integriert und jetzt wolfson sound (sieht man auch am name n7100nadia-r5-WS) muss ich vorher kurz zum stock kernel ?
 
redbull1

redbull1

Lexikon
Kernel cleaning script laufen lassen, dann den neuen flashen müsste genügen.
 
Astra-Celly

Astra-Celly

Stammgast
Habe dirty drüber bis jetzt keine probleme

Wo finde ich den cleaning script