Swiftkey: Die Revolution der Tastatur

Status
Für weitere Antworten geschlossen.
Hi, habe SwiftKey auf dem Wildfire. Läuft soweit ganz gut. Aber ich hätte gern, das ich, wenn ich das Handy im hochformat halte, die normale T9 Tastatur erscheint. Bei der normalen Tastatur kann man das Einstellen, geht das hier auch?
 
Nein, swiftkey hat noch keine anderen Layout Möglichkeiten.
 
jetdevil schrieb:
nutze hauptsächlich Ultrakeyboard
Ist das beim "Vorausahnen" genauso gut wie Swiftkey?

nica schrieb:
Falls du Pfeile meinst, um die Einfügemarke zu bewegen: Ja. Aber nicht auf dem normalen Bildschirm direkt.
Kannst du das mal näher erläutern? Wo finde ich die?

nica schrieb:
Allerdings unter Froyo kaum mehr nötig, da man ganz gut per Finger da die Stelle setzen kann.
Und das auch? ;)
 
Ultrakeyboard ist, sofern man sein Wörterbuch füllt sehr gut im voraus ahnen. T9 geht damit auch im Landscapemodus wenn man es justiert.

Da ich Swiftkey gekauft hatte teste ich die auch nochmal.

erstellt mit Desire HD & Ultrakeyboard
 
Sorry, letzte OT Frage meinerseits...

jetdevil schrieb:
sofern man sein Wörterbuch füllt
Übernimmt Ultrakeyboard unbekannte Wörter automatisch?
 
Is nun echt OF es geht ja hier um Swiftkey!

Aber man muss Ultrakeyboard mit einem klick mitteilen das das unbekannte Wort ins Wörterbuch übernommen wird, dass sieht man an ROTEN Wörtern das es noch nicht bekannt ist. Damit wird es immer schneller und genauer je länger man es nutzt. Im Sliden oder wie ultrakeyboard es nennt im tracen ist die Tastatur unschlagbar schnell!
 
  • Danke
Reaktionen: UWdus
Zig schrieb:
...Das Einzige was mich nocht stört: wenn ich z.B. eine 7 tippen möchte, drücke ich lange auf das U. Dann kommt jedoch statt der 7 eine weitere Auswahl mit Zeichen, die ich nie im Leben benutze. Nun muss ich die 7 noch einmal bestätigen. Das finde ich umständlich.

Einen Menüpunkt zum Einstellen gibt es nicht, oder?

Dadof3 schrieb:
@ Zig, du kannst das englische Tastatur-Layout ohne Sonderzeichen wählen, allerdings hast du dann gar keine Umlaute mehr, und es ist QWERTY, nicht QWERTZ.

Danke, was mich wundert: stört euch das nicht?

Es gibt einen Menüpunkt feedback, vielleicht sollten den mal ein paar mehr Leute benutzen und auf so etwas aufmerksam machen.
 
Zig schrieb:
Danke, was mich wundert: stört euch das nicht?

Nein, ich finde es gut gelöst so. Schließlich will ich ja auch solche Sonderzeichen auswählen können. Für eine einzelne Ziffer ist das ja nur ein Klick mehr, und wenn ich mehrere Ziffern hintereinander tippen will, nehme ich den Ziffernblock (Taste unten links).


Codi11 schrieb:
Aber ich hätte gern, das ich, wenn ich das Handy im hochformat halte, die normale T9 Tastatur erscheint.

jetdevil schrieb:
T9 geht damit auch im Landscapemodus wenn man es justiert.

Sorry, aber irgendwie verstehe ich den Sinn dieser Lösung nicht. T9 war eine Hilfslösung, um auf Ziffernblöcken schneller Texte verfassen zu können. Warum soll ich aber, wenn ich eine volle Tastatur haben kann, mir stattdessen einen Ziffernblock anzeigen und dessen Mängel dann wieder durch so eine Krücke wie T9 beheben lassen?

Für mich klingt das nach "Ich hätte gerne die Option, ein Problem zu bekommen, das ich dann mit T9 lösen kann." :)
 
Zuletzt bearbeitet:
Zig schrieb:
Danke, was mich wundert: stört euch das nicht?

Es gibt einen Menüpunkt feedback, vielleicht sollten den mal ein paar mehr Leute benutzen und auf so etwas aufmerksam machen.

Mich stört das auch.
Das ist das einzige, was mir an der Standard-HTC-Tastatur auf meinem Desire besser gefällt als an Swiftkey.

Nein, ich finde es gut gelöst so. Schließlich will ich ja auch solche Sonderzeichen auswählen können.
Das geht ja mit der HTC-Tastatur z.B. auch problemlos. Man hält den Finger einfach gedrückt und "wischt" dann auf das entsprechende Sonderzeichen, anstatt ein zweites mal "tippen" zu müssen. Das ist m.E. deutlich praktischer als bei Swiftkey.
 
@ Dadof3
Wenn ich beide Hände frei habe, nutze ich natürlich auch die volle Tastatur. Aber unterwegs, zb. beim Gassi gehen, an einer Hand den Hund, in der anderen Hand das Handy, finde ich die T9 Tastatur mit den größeren Tasten für ne kurze sms praktischer.
 
Dadof3 schrieb:
Ob man das als Trick bezeichnen sollte, weiß ich nicht, aber es geht auf jeden Fall mit a/o/u/A/O/U und dann Alt-Shift-u. Für ß: s und Alt-Shift-s.


Also das ß funktioniert auf diese Weise, aber die Umlaute hauen so nicht hin. Bei mir jedenfalls nicht, du hast das bei dir auch schon getestet,ja? :confused:
 
Heavy schrieb:
Also das ß funktioniert auf diese Weise, aber die Umlaute hauen so nicht hin. Bei mir jedenfalls nicht, du hast das bei dir auch schon getestet,ja? :confused:

Ja, habe ich. Wichtig ist: Alt-Shift-u, egal welchen Vokal man mit Pünktchen versehen will. Das hatte ich anfangs nicht gerafft.
 
  • Danke
Reaktionen: Heavy
Also bei mir ist es so, dass beim langen drücken die zahl oder das Sonderzeichen kommt. Die sind über die ganze Tastatur verteilt.
 
Moment, wenn Du "U" lange drückst, kommt doch ein weiteres Auswahlfeld, in dem Du dann die 7 nochmal bestätigen musst. Oder?
 
Nein, wenn ich lange auf u drücke, kommt ohne weitere Auswahl direkt 7.

Version 1.1. 77
 
Liegt daran, dass ich englisches layout nutze. Da gibt's keine umlaute.
 
Nach dem Update hat Swiftkey ja scheinbar einige Probleme im
Landscape Modus, so das die Tastatur den Hintergrund überdeckt,
heute gabs Antwort vom Support,
"From: TouchType-Dev
Subject: HTC Desire HD - Landscape issue

Thanks for reporting this guys. We're hoping to improve the problem soon, but have to prioritise issues with the standard Android OS first.

Thanks for your support and patience!

Ben

na dann warten wir mal ab.;)
 
Gibt eine neue Beta "SwiftKeyBeta-172.apk"

Wobei im Header steht: SwiftKey Next-Generation Beta 1.98.1.172

Für alle die sich noch als "vip" angemeldet haben: Hier


Release notes

Introduction

This beta of SwiftKey is radically different to what you've used in the past. We've enhanced and redesigned many of the core features. Not all of our new features are ready just yet, but this first installment should be enough to keep you satisfied for now!

This is an early beta. Not everything will work as designed. In particular, the installation wizard is not yet completely integrated with the new features, and elements of the language module selection and SMS scan are not working. We will endeavor to update this beta in due course.

Another thing: this beta will not inherit your current learned language data, and stores its data in a new place on your SD card. When we get to further beta iterations, we will have a framework to inherit previous learned data, but for now we’re keeping this app isolated from your learned data, for a number of reasons.

Please offer us detailed feedback in the relevant part of our feedback forum. We will then strive to smooth over the cracks and make further updates in due course.

Next generation Fluency Prediction Engine

We've redesigned and improved SwiftKey's core prediction engine, Fluency, to make it appreciate how you type from first keypress to prediction selection. The result is greater robustness, prediction accuracy and writing efficiency.

New language module download service

In the past, some SwiftKey users have run into trouble downloading a language module. To fix this, we've totally redesigned the way SwiftKey downloads language data from our servers, to provide a cleaner, more robust way of managing language modules. NOTE: this is currently in a very early stage, and there are problems with certain aspects, particularly learning from SMS.

Better typo and spelling correction

While SwiftKey is already excellent at next-word predictions, sometimes it isn't as good at correcting common typos or spelling mistakes. We've redesigned the way the app deals with these errors, to offer powerful spelling and mistyping correction, in context with what you're typing. Among other things, it can now work out what you mean, even when you miss a key, or get two letters the wrong way around.

New prediction modes

We now have prediction mode settings that allow you to customize the correction and completion behavior of SwiftKey to your personal taste.

With Classic mode, SwiftKey will behave in a similar way to what you’re currently used to, blending automatic correction of typos with in-line word completion and next-word predictions.

With Rapidfire mode, you can type superfast with errors and SwiftKey will work out what you mean to type. We’ve adjusted the correction algorithm in this mode to focus on typos and to not contemplate longer words as you type. So, so long as you roughly get the character length and position of your letters right, SwiftKey should work out what you’re typing at lightning pace.

With Manual mode, you can switch off our automatic correction and completion features entirely, giving you a pure keyboard mode for the careful typist, with three real predictions that always display. We certainly know a bunch of people who’d find this useful from time-to-time.

And, if that’s not enough… we’ve created a Custom mode that lets you fine-tune SwiftKey’s prediction and correction/completion features to behave exactly as you’d like them to.

Take primary prediction on punctuation, not just space

Many have asked for it, so now we have it. With our current beta, you can proceed with a word once it’s in the primary selection area by pressing space or some punctuation keys - period, comma, exclamation point and question mark.

Experimental email address entry

Another big one for many… we’ve altered how @ is treated by SwiftKey (like any other letter) and we’ve tweaked Fluency to remember email addresses in full. This means entering email addresses should be much easier… but it may look a bit weird to have a very long one occupy the whole prediction button (the text will become very small). We’re currently thinking about ways to make this display better.

Language detection

Previous SwiftKey allowed you to type in two languages at once. We’ve now enhanced our multilingual support framework to make it work even more effectively. In new SwiftKey, a user’s text is constantly scanned to estimate which of multiple enabled language modules is being used, with predictions adjusted accordingly.

Skinning mechanism

After great demand, we have created a skinning framework for SwiftKey. We’re kicking this off with two skins, a dark one and the light skin from the previous release. Over the coming weeks, expect more skins, as well as a skinning API to enable third parties to create skins for SwiftKey.

Accented characters now populated dynamically

Another one for our multi-lingual folks; the characters viewable on long-press are modeled dynamically to the languages that are currently enabled. For example, if you speak French and English and have both enabled, the relevant accented characters will display on long-press regardless of your key layout (QWERTY, AZERTY, etc.).

We’re working on an override for this to enable all alternative keys across the keyboard layouts, for those who may need access to rare characters without having languages enabled.

Remove any word from predictions, not just learned words

Also known as ‘deep term removal’, what this means is you can long-press and remove any predicted word or punctuation symbol from the prediction bar, even if it exists in the core language module. So if a word or symbol keeps popping up that you never use, throw it away! It then won’t reappear until you manually enter it.

This is particularly fun if you like writing random sentences with SwiftKey, as you can remove various words and symbols that may terminate sentences or create infinite loops, and write some really weird prose!

+++++

I’m sure I’ve missed something, but this should be enough for starters. There are some features which will come soon, such as arrow keys and social network personalization tools, but you’ll have to wait a little bit for those
icon_e_wink.gif


Oh, and below’s a list of currently ‘known’ issues with the beta. Enjoy!

Cheers,
Joe

Known issues:

* not every requested feature is here yet: we have a list and we’re working through it, promise
icon_e_wink.gif

* there’s a problem with capitalization – sometimes words will be predicted as lower case when they should be capitalized
* there are currently problems with the SMS learning function – it may be safest not to use it
* prediction area can be a bit buggy, with things not scaling properly
* progress bar for "Learn from SMS" sometimes appears for "Refresh configuration" instead. (It is in fact learning, not refreshing.)
* when a language pack download completes, sometimes it is not moved to the "Downloaded languages" list and remains under "Available languages". (It will be correct next time the list is loaded or if you press "Refresh configuration".)
* after selecting different languages, the predictions are not updated immediately
* "Manage Language Packs" appears as a separate task (e.g. if it was used recently, it appears after a long-press on Home)
* "Manage Language Packs" status bar notification icon is wrong
* "Manage Language Packs" status bar notification crashes if chosen
* reports of occasional crashes, sometimes after the activity has been completed, e.g. a few minutes after learning SMS
 
  • Danke
Reaktionen: shanghai
Habe es nur überflogen, aber schön, dass sich da noch was grundlegendes tut.
Komme grade nur noch nicht an die APK dran, zum selber Testen.
 
Status
Für weitere Antworten geschlossen.

Ähnliche Themen

S
Antworten
3
Aufrufe
173
tecalote
tecalote
R
Antworten
5
Aufrufe
261
robert.vienna
R
Kusie
Antworten
4
Aufrufe
295
Kusie
Kusie
Zurück
Oben Unten